HappyModel X12 AIO 5-IN-1 Flight controller SPECIFICATIONS
Wheelbase: Screws
Use: Vehicles & Remote Control Toys
Upgrade Parts/Accessories: Car Shell Column
Tool Supplies: Sticker
Technical parameters: Value 2
Size: 56.1mmx42.1mmx38.6mm
Remote Control Peripherals/Devices: ESC
Recommend Age: 12+y
RC Parts & Accs: Motors
Quantity: 1 pcs
Origin: Mainland China
Model Number: HappyModel X12 AIO
Material: Metal
Four-wheel Drive Attributes: Assemblage
For Vehicle Type: Cars
HappyModel X12 AIO 5-IN-1 Flight controller built-in 12A ESC and OPENVTX support 1-2s ELRS For fpv Racing drone Crux3 Crux35
X12 AIO 5-IN-1 Flight controller built-in 12A ESC and OPENVTX
The world first 5-IN-1 AIO flight controller, OPENVTX(up to 400mw), 12A Brushless Blheli_S ESC and Betaflight OSD coming out recently.
It comes with onboard SPI ELRS receiver which support
This is an amazing flight controller for Brushless whoop. You could get unbelievable RX and VTX range by using this flight controller.
Specifications:
Brand Name: Happymodel
Item Name: X12 AIO 5-IN-1 Flight controller built-in 12A ESC and OPENVTX
Betaflight firmware target:
ELRS Version: CRAZYBEEF4SX1280
FRSKY Version:CRAZYBEEF4FR
PNP Version:CRAZYBEEF4DX
LITE Version:CRAZYBEEF4SX1280
VTX antenna: U.FL
Weight: 5.1g
Size: 30mm*30mm*8mm
Flight controller
|
X12 ELRS V2.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280
X12 Frsky V1.0 flight controller built-in FRSKY 2.4G receiver Target: CRAZYBEEF4FR
X12 PNP V1.0 flight controller without onboard receiver Target CRAZYBEEF4DX
X12 LITE V1.0 flight controller built-in ELRS 2.4G receiver Target:CRAZYBEEF4SX1280
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Built-in Betaflight OSD(SPI Control)
Built-in current meter sensor , current meter scale 470
|
Onboard 4in1 ESC
|
Power supply: 1-2S LiPo/LiPo HV
Current: 12A continuous peak 15A (3 seconds)
Support Bluejay firmware
When use Blujay firmware with 48khz, should set startup power to 1100/1200
|
Onboard SPI ExpressLRS 2.4GHz Receiver
|
Packet Rate option: 50Hz/150Hz/250Hz/500Hz
ExpressLRS Firmware version: V2.0
Antenna : SMD antenna
Receiver protocol: SPI ExpressLRS
Compatible with ExpressLRS V2.0 TX Module
Couldn’t flash separately ExpressLRS firmware
|
Onboard Frsky SPI D8/D16 receiver Version
|
SPI BUS receiver
CC2500 RF
Support Frsky D8/ D16 , Redpine , SFHSS
|
Onboard 5.8g OPENVTX
|
Firmware version: OPENVTX
Smartaudio v2.1
PIT Mode support
RCE Mode support
Channels:48ch
Transmitting Power: 0/RCE/25mw/100mw/400mw
Power supply: DC 5V
Current (5v): <650ma (400mw)
Antenna connector: U.FL
|
X12 LITE V1.0 Firmware Target CRAZYBEEF4SX1280 GYRORACC MPU6OOO . FRSKY D8/D16 NO ELRS V2.0 On board VTX OpenVTX .
Reviews
There are no reviews yet.