ISDT C4 EVO Smart Battery Charger SPECIFICATIONS
Wheelbase: Screws
Use: Vehicles & Remote Control Toys
Upgrade Parts/Accessories: Adapter
Tool Supplies: Cutting
Technical parameters: Value 3
Size: 122*85*38mm
Remote Control Peripherals/Devices: Battery Charging Units
Recommend Age: 12+y
RC Parts & Accs: AXLE
Quantity: 1 pcs
Origin: Mainland China
Model Number: C4 EVO
Material: Composite Material
Four-wheel Drive Attributes: Assemblage
For Vehicle Type: Airplanes
ISDT C4 Specification
Model | C4 |
Input Power | DC 12-24V/2.5A |
Circuit Power | max. Charge power 25W max. Discharge power 10W |
Battery Count | 1 – 4 single cells, cylindrical |
Battery Size | AAA,AA,10440,10500,12500,12650, |
Operating Voltage Range | 0.2V – 5.0V/slot |
Battery Chemistry Type | NiMH, NiCd, NiZn, Eneloop, Li-Ion, LiHv, LiFePO4 |
Charge Current Range | 0.1A – 3.0A/slot |
Discharge Current Range | 0.1A – 1.5A |
Operation Modes | Charge, Discharge, Storage, Cycle, Activation, Analysis |
Cycle Count | 1 – 66 cycles |
Display | 320×240 IPS LCD |
Beep Sound | Multi-tone |
Temperature Sensors | 5 for inner |
Operating Temperature | 0℃ – 40℃ |
Calibration | Factory calibration |
Voltage Measurement | ±10mV internal resolution |
Current Measurement | ±10mA internal resolution |
Standby Current Drain | <0.05mA/battery |
External Ports | DC Input, Micro USB Link, USB power output |
USB Power Output | DC 5V / 2.1A |
Firmware Update | Yes |
Reverse polarity protection | support |
Over temperature protection | support |
Over capacity protection | support |
Dimensions (L×W×H) | 122×85×38mm |
Material | PC+ABS casing, aluminum heatsink |
Weight | 153g(approx.) |
CA Automatic Battery Type Identification Auto-setting for accurate battery charging voltage & modes 5u7 SMART CHARGER C4 Si Lilon Discharging ‘S6mah’
Independent working channels enable individual battery programming and charging, with a maximum current support of 3A per channel. Each channel can be operated independently in one of three working modes: charging, discharging, or cycling.
The ISDT C4 EVO Smart Battery Charger allows for manual settings of battery types, charging current and mode, as well as cycle index. Additionally, setup is easy with options such as 1.6A, 1.5A, or 1.4A charging modes.
User-friendly operating mode automatically identifies battery types and adjusts charging currents as needed. The touch-and-slide panel allows for customizable settings, featuring a large 7-inch screen that displays important information such as charge status, capacity (up to 18650mAh), and more.
Live on the display, charging information is presented in real-time, including:
* Charging status
* Battery type (Li-ion)
* Internal resistance
* Temperature
* Time elapsed during charging
* Current and voltage variation curve
* Capacity variation curve
The battery type being charged is Li-ion. The current task operation shows a capacity of 186mAh at a present voltage of 4.09V, with a current level of 0.08A.
Time: 00:13:08
Temperature: 39°C (Resistance time)
Please note that I corrected some minor errors and rephrased the sentence to improve readability and clarity.
The display screen features a 2.4-inch IPS AII-view design with a wide viewing angle of 178 degrees, adjustable backlight options for optimal readability, and remains visible even in direct sunlight.
This smart charger, ISDT C4 EVO, supports up to 14V and 2.5A charging for 57 batteries at once (62% charged). It features a Type-C QC3.0 output for fast charging of AA/AAA Li-ion batteries via USB. The battery charging power will dynamically adjust to match the demand of the connected device.
This smart charger features multiple charging and discharging modes, supporting various battery types and options. It also includes an activation analysis cycle that simulates a battery’s natural charge and discharge process to check its capacity, allowing for gentle low-current charging up to 66 cycles.
The ISDT C4 EVO Smart Battery Charger features an intelligent charging process for IMR batteries, with an easy-to-operate interface that incorporates powerful charging algorithms for Li-ion, NiMH, and Eneloop cycling. Additionally, it supports various battery types, including SG mah 3.25V/1.17A (189mAh), NiMh 1.45v, and Deltav 5Omah 1.30v/1.00A (186mAh) with a maximum output of 0.804.
iSDT continually strives to enhance the user experience, pushing boundaries to achieve limitless innovation. The company’s engineering team dedicates itself to refining efficiency, driven by a commitment to excellence.
Integrated reverse polarity protection is present on both the input and output of the ISDT C4 EVO Smart Charger, ensuring safe and reliable charging for your devices.
The ISDT C4 EVO Smart Battery Charger features a wide voltage input that supports 12-24V input voltage, providing greater flexibility and freedom when using different power sources.
Equipped with a high-speed ball-bearing fan, this charger features forced cooling for efficient charging and discharging processes.
This smart charger features high-quality materials that extend its service life and enhance safety performance. It includes: a touch panel for easy operation, three battery slots for charging multiple devices at once, an IPS LCD display with clear specifications, a micro USB upgrading port, a USB output port for data transfer, heat-distribution pores for efficient cooling, and an input port for recharging the charger itself.
Reviews
There are no reviews yet.