Product Overview
The YL50 Video Transmission Box, matched with the R30 receiver series, adopts advanced SDR technology and super protocol stacks, delivering clearer images, lower latency, longer transmission distance and stronger anti-interference performance. It is applicable to drones, robots, industrial control equipment etc. The R30 receiver is equipped with abundant interfaces including dual LAN ports, sensor interfaces, dual serial port transparent transmission and SBUS. It enables operation for aerial photography, security, fire protection, power inspection, surveying and mapping robots, border defense and other applications, delivering an immersive on-site experience. The YL50 Video Transmission Box is equipped with dual-band antennas (1.4G, 2.4G) with mutual signal complementation and automatic switching, providing ultra-strong signal and ultra-long range. Its integrated algorithm control and out-of-step frequency hopping algorithm greatly improve the communication performance in weak signal environments.
Visual Specification Notes
The following product details were transcribed from the technical graphics supplied with this model.
- The YL50 is equipped with a highly integrated three-in-one data-video-control link, which integrates remote control commands, multi-source data, and high-definition image transmission into a single link, eliminating the need for additional communication modules.
- The YL50 supports dual frequency bands of 1.4 GHz and 2.4 GHz, and you can set it to use either band independently, or activate both bands simultaneously to flexibly meet the requirements of different devices.
- The YL50 is built on Skydroid's data-video-control link technology, and with the R30 receiver it can achieve a maximum 50 km for data and video transmission under ideal conditions.
- The YL50, including the antenna, weighs 204 grams, and the compact, portable box stays easy to carry.
Key Parameters
Values read from the manufacturer parameter table for this model.
| Parameter | Specification |
|---|---|
| Video Transmission Channels | PPM 8 / SBUS 16 |
| Operating Voltage | 7.2V-80V |
| RF Power | 23dBm @CE/FCC |
| Dynamic Frequency Band | 1.4G: 1427.9-1447.9MHz, 2.4G: 2401.5-2481.5MHz |
| Frequency Hopping | Supports adaptive frequency hopping |
| Dimensions | 66 (L) x 19.7 (W) x 93.6 (H) mm |
| Weight | 204.5g (antenna 68.8g) |
| Maximum peak input power | less than 4W |
| Interface | Type-C port, RJ45 Ethernet port, SBUS/PPM input port (GH1.25), XT60 power input connector, box-side antenna port (SMA female) |
| Applications | Helicopters, Fixed-wing Aircraft, Multirotors, Vehicles & Vessels |
| R30 Receiver Operating Voltage | 7.2V ~ 80V |
| R30 Receiver Maximum Peak Power | 4W |
100drone Selection & Integration Notes
Before deployment, confirm the air-unit/receiver pairing, supported frequency bands, required antennas and the control protocol used by the aircraft. For Android-based controllers, verify the ground-station app version and peripheral permissions during commissioning.
100drone Integration Support
100drone supports industrial UAV platform integration, payload matching, data-link configuration and deployment planning. Our team includes former DJI R&D engineers and can provide practical compatibility guidance for DJI ecosystems and custom ground-control APP workflows.