Description
Futaba 6K-V3S 8-Channel Transmitter with R3008SB Receiver – FUTK6100
An incredible value in 8-channel control
You’ll be hard pressed to find another 8-channel system with as many functions as the 6K at a comparable price. Telemetry sensors monitor critical flight data, including temperature, RPM, altitude, receiver battery voltage, external voltage and variometer. It’s compatible with S.Bus and S.Bus2 servos, and setting functions can be programmed through the transmitter. Controls are positioned to be within easy reach, and the menu is a breeze to navigate.
Throw in other features such as 30 model memory, a 128×64 DOT backlit LCD screen and updateable software, and it’s easy to see how the 6K is a lot of radio for the money. With the V3 version updates the value has never been better! The NEW 6K is an 8-channel system with additional telemetry functions, expanded multicopter flight modes and much more.
![]() |
The Power of 2.4GHz The 6K-V3S utilizes modern 2.4GHz signal transmission and reception technology that delivers incredible reliability and unparalleled signal strength. |
![]() |
74 Years of Service and Counting Futaba was founded in Japan in 1948. With over 5,000 international employees and hundreds of thousands of products delivered across generations, Futaba remains leaders in RC technology and products. Fly only the best with Futaba! |
Features:
- NEW! 8 channel receiver (R3008SB) is included
- NEW! Switch D is changed from 2 positons to 3 positons
- NEW! Glider functions strengthened (Added wing type 2AIL-B, Trim-mix for rudder, conditions increased from 3 to 4)
- NEW! Timer (Added 1 more time and having 2 timers)
- NEW! Helicopter function (Governor gain added)
- S-FHSS/T-FHSS selectable
- Telemetry system (T-FHSS) with data speech function
- Built-in antenna
- S.Bus/S.Bus2 servo setting functions programmable through the transmitter
- Preset vibration alarms
- 30 model memory
- 8-character model/user naming
- Programmable mixes for airplanes, helicopters, gliders and multi-rotors
- Digital trims with variable step settings
- Adjustable stick length and tension
- Changeable switch/VR position and AUX channel function
- Throttle position warning
- Backlit 128×64 DOT LCD screen with adjustable display contrast
- Software updateable through the CIU-2
- Screen Lock
- Earphone/S.Bus/Trainer jacks
- Assignable switches (three 3-position, one 2-position)
- Range Check
- Program navigation bay with jog dial, +/- pads and end pad
- Data reset
- Model copy
- Selectable model type
- Fail Safe
- End Points
- Trim/Trim Resets/Trim Steps
- Sub Trim
- Servo Reversing
- Parameter functions
- Servo monitor/Test
- Wireless model data transfer
- Timer-System and Model (Up/Down)
- Trainer system
Includes:
- Futaba 6K-V3S 8-Channel Transmitter
- R3008SB 8 CH Receiver
Requires:
- Four (4) AA size batteries – we recommend Admiral NiMH AA Rechargeable Batteries (4 Pack)
Optional:
- 6V NiMH or 6.6V LiFe batteries
![]() |
The included R3008SB receiver has eight standard PWM ports plus S.Bus and S.Bus2 ports. You can use S.Bus as the main link to your servos or a combination of the ports. The S.Bus2 port allows bi-directional communication with T-FHSS Futaba air transmitters and the use of a wide array of telemetry sensors. |
The versatile 6K meets the control needs of a wide range of R/C pilots!
![]()
|
![]()
|
![]()
|
||
![]()
|
![]()
|
![]()
|
||
![]()
|
Product Specifications:
Number of Channels |
8 |
Modulation / Protocol |
S-FHSS and T-FHSS |
Band |
2.4Ghz |
Mode(s) |
Mode 1-2 (Default Mode 2) |
Model Memory |
30 Aircraft |
Display |
Backlit LCD |
Rotary Knobs |
1 |
2-Position Switches |
2 |
3-Position Switches |
2 |
Slider Switches |
None |
Momentary Switches |
1 |
Gimbals |
Dual Ball Bearing |
Telemetry |
Yes |
Voice Alerts |
No |
Memory Card Support |
No |
Data Port |
Yes |
Upgradeable Firmware |
Yes |
Trainer System |
Yes (Wired) |
Dual Rate / Expo |
Yes |
Throttle Cut |
Yes |
Servo Speed Adjustment |
No |
Battery |
4 AA (Required) |
Reviews
There are no reviews yet.