{
 "@context": "https://schema.org",
 "@graph": [
  {
   "@type": "Product",
   "@id": "https://100drone.com/ar/product/matek-h743-mini-v3-mateksys-flight-controller-2/#product",
   "url": "https://100drone.com/ar/product/matek-h743-mini-v3-mateksys-flight-controller-2/",
   "name": "ماتيك H743-MINI V3-وحدة تحكم الطيران ماتيكسيس",
   "description": "MATEK H743-MINI V3 - Mateksys FLIGHT CONTROLLER SPECIFICATIONS Use : Vehicles & Remote Control Toys Recommend Age : 12+y,14+y,3-6y,6-12y,0-3y Origin : Mainland China Material : Composite Material Brand Name : MATEKSYS FLIGHT CONTROLLER H743-MINI STM32H743VIT6, ICM20602 & MPU6000, DPS310, OSD, 5.5x UARTs, 2x I2C, 1x CAN, 11x PWM outputs, BEC5V, BEC8V FC Specifications MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash Board V1.0 IMU: MPU6000 (SPI1) & ICM20602 (SPI4) Board V1.5 IMU: MPU6000 (SPI1) & ICM42605 (SPI4) Board V3 IMU: ICM42688-P (SPI1) & ICM42605 (SPI4) Baro: Infineon DPS310 (I2C2) OSD: AT7456E (SPI2) Blackbox: MicroSD card socket (SDIO) 5.5x Uarts (1,2,4,6,7, Rx8) 11x PWM outputs 2x I2C (I2C1/DA1 CL1 pads, no I2C2 breakout) 1x CAN (C-H, C-L pads) 5x ADC (VBAT, Current, RSSI, VB2, CU2) 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red) 1x JST-SH1.0_8pin connector (Vbat/G/Curr/Rx8/S1/S2/S3/S4) Dual Camera Inputs switch 8V power ON/OFF switch Power Vbat Input: 6.3~36V (2~8S LiPo) BEC: 5V 1.5A cont. (Max.2A) BEC: 8V 1.5A cont. (Max.2A), 8V outputs stable when Vbat>=10V, 8V outputs 80% of Vbat when Vbat< 10V LDO 3.3V: 200mA VB2 pad supports Max. 69V (voltage divider 1K:20K) Static power: 200mA@5V with Betaflight, 150mA@5V with ArduPilot FC Firmware ArduPilot(ChiBiOS): MATEKH743 BetaFlight: MATEKH743 INAV: MATEKH743 Physical Mounting 20 x 20mm/Φ3mm with Silicon Grommets 20 x 20mm/Φ2mm with Silicon & Brass Grommets Dimensions: 36 x 28 x 6.5mm Weight: 7g Including 1x H743-MINI 6x Silicon grommets M4 to M3 6x Brass grommets M3 to M2 1x JST-SH1.0_8pin cable, 5cm 2x JST-SH1.0_8pin connectors What is new on the H743-mini V3 ICM42688-P+ICM42605 instead of MPU6000+ICM42605 PWM 10 & 11 instead of PWM9 & 10(V1/V1.5) Other functions, layout and components are same as previous board version. H743-mini V3 has betaflight_4.3.0 preloaded for QC ArduPilot H743-mini-V3 with ICM42688-P is supported by ArduPilot 4.2 or higher, ICM42688-P is defined as first IMU (IMU0) , ICM42605 is the 2nd (IMU1). with ArduPilot 4.2, set INS_ENABLE_MASK to 7 or default 127. It is recommended to use STM32CubeProgrammer to erase MCU and upload firmware. check this blog https://www.mateksys.com/?p=6905 INAV H743-mini-V3 is not supported by INAV4.1 downloaded from configurator. pls download inav_4.1.0_MATEKH743_42688 from our website. Starting with INAV5.0, V1/V1.5/V3 will share the same firmware. BetaFlight IMU ICM42688-p is supported by BetaFlight 4.3 or higher. icm42688-p is the first IMU(default), ICM42605 is the second IMU. Target MATEKH743 in BetaFlight 4.2.x list doesn’t support ICM426XX series, You need to flash it with BF4.3_RC or latest",
   "image": [
    "https://image.100drone.com/wp-content/uploads/2024/05/11092648/S9b0338cb6afb4f118ffe46c49ba901f4P.jpg",
    "https://image.100drone.com/wp-content/uploads/2024/05/11092643/S96d0f5c1f80f40768b41c1f134afd317X.jpg",
    "https://image.100drone.com/wp-content/uploads/2024/05/11092640/S6848850c5dc34ea9abaa2c6e563daa86P.jpg",
    "https://image.100drone.com/wp-content/uploads/2024/05/11092637/S019f9c7d890140299e1bd45b795c6dc5D.jpg"
   ],
   "category": "جهاز إرسال واستقبال الدرون",
   "additionalProperty": [
    {
     "@type": "PropertyValue",
     "name": "Frequency",
     "value": "480 MHz",
     "unitText": "MHz"
    },
    {
     "@type": "PropertyValue",
     "name": "Voltage",
     "value": "3.3 V",
     "unitText": "V"
    },
    {
     "@type": "PropertyValue",
     "name": "Voltage",
     "value": "8 V",
     "unitText": "V"
    },
    {
     "@type": "PropertyValue",
     "name": "Voltage",
     "value": "6.3~36 V",
     "unitText": "V"
    },
    {
     "@type": "PropertyValue",
     "name": "Voltage",
     "value": "5 V",
     "unitText": "V"
    },
    {
     "@type": "PropertyValue",
     "name": "Current",
     "value": "1.5 A",
     "unitText": "A"
    },
    {
     "@type": "PropertyValue",
     "name": "Voltage",
     "value": "10 V",
     "unitText": "V"
    },
    {
     "@type": "PropertyValue",
     "name": "Ratio",
     "value": "80 %",
     "unitText": "%"
    },
    {
     "@type": "PropertyValue",
     "name": "Current",
     "value": "200 mA",
     "unitText": "mA"
    },
    {
     "@type": "PropertyValue",
     "name": "Voltage",
     "value": "69 V",
     "unitText": "V"
    },
    {
     "@type": "PropertyValue",
     "name": "Current",
     "value": "150 mA",
     "unitText": "mA"
    },
    {
     "@type": "PropertyValue",
     "name": "Dimension",
     "value": "20 mm",
     "unitText": "mm"
    },
    {
     "@type": "PropertyValue",
     "name": "Engine model",
     "value": "6Y"
    }
   ],
   "offers": {
    "@type": "Offer",
    "price": "169.91",
    "priceCurrency": "USD",
    "availability": "https://schema.org/InStock",
    "itemCondition": "https://schema.org/NewCondition",
    "url": "https://100drone.com/ar/product/matek-h743-mini-v3-mateksys-flight-controller-2/"
   }
  },
  {
   "@type": "FAQPage",
   "@id": "https://100drone.com/ar/product/matek-h743-mini-v3-mateksys-flight-controller-2/#faq",
   "mainEntity": [
    {
     "@type": "Question",
     "name": "How much does ماتيك H743-MINI V3-وحدة تحكم الطيران ماتيكسيس cost?",
     "acceptedAnswer": {
      "@type": "Answer",
      "text": "ماتيك H743-MINI V3-وحدة تحكم الطيران ماتيكسيس is priced at 169.91 USD."
     }
    },
    {
     "@type": "Question",
     "name": "What are the key specifications of ماتيك H743-MINI V3-وحدة تحكم الطيران ماتيكسيس?",
     "acceptedAnswer": {
      "@type": "Answer",
      "text": "Frequency 480 MHz; Voltage 3.3 V; Voltage 8 V; Voltage 6.3~36 V; Voltage 5 V; Current 1.5 A."
     }
    }
   ]
  }
 ]
}