Warm notice: camera is not included in it.

Особенности:
It is suitable for all kinds of drones frames.
The alloy shell is helpful for heat dissipation and beautiful appearance.
It is compatible with Smart Audio V1 agreement, it can adjust frequency point through flight control.
The small size is easy for you to set up and use.
One short press a button, change the number of channels 1 to 8 cycles.
The high quality of it enables it has excellent performance. 

Технические характеристики:
Item name: TX1769 Transmitting Module
Transmitter operating voltage: 7V DC-26V DC
Input current: 130/230mA 12v
Output voltage: 4.2v
High power: 200mW
Low power: 25mW
Frequency range: 5362-5945Mhz
Working temperature: -10 ± 85°C
Video bandwidth: 8m
Size: 21.58 * 25.5 * 4mm
Net weight: 7.7g

Технические характеристики:
Item name: TV17621 170degree Wide AngleMicro DVR Camera
Power supply voltage: DC 3.5-5.5v
Storage temp : -20~60°C
Image sensor: 1/4″ CMOS Sensor
Sensor pixels: 130w
Lens: M7, horizontal 170 degrees, vertical 105 degrees
Output impedance: 75Ω
Format: NTSC
Codex: MJPEG
SD card: Max 32G
Size: 19 * 19.3 * 21.6mm
With the shell: 6.7g

Item name: TX1769 Transmitting Module
Transmitter operating voltage: 7V-26V DC
Output voltage: 4.2v
High power: 200mW
Low power: 25mW
Frequency range: 5362-5945Mhz
Working temperature: -10 ± 85°C
Video bandwidth: 8m
Size: 21.58 * 25.5 * 4mm
Net weight: 7.7g

There could be a few deviations due to manual measurement.

Package List:
There are 2 types of item with different package list,please note it when you order :
1. V3 TV17621 170degree Wide Angle Micro DVR Camera and TX1769 25/200mW Transmitter Module 
2. TX1769 25/200mW Transmitter Module 

Mechanical Specification Button 27+0 1 1 19 +0.2mm 19.3+0.2mm SD Card Pin Assignment Numbering Interface Definition T0 DC + SV in GND GND Sv CVBS out 2

The TV17621 camera has a Smart Audio V1 protocol interface, which accepts PWM signal input from GND, DC IN (7-26V), and features dimensions: 25.5mm x 38mm.

This transmitter module features blue LED lights that indicate the frequency band, while red LED lights display the channel number (1234). The X symbol indicates the power off function. To switch between frequency groups, press and hold the key for 2 seconds until the blue light starts flashing, then release it to change the group.