AKK FX2 5.8GHz 0.01/25/200/500/800mW 40CH Switchable FPV Transmitter with UART Support OSD Configuring via Betaflight Fligh

Технические характеристики:
Operating Voltage: 7 – 24V
Power supply: 5V camera@under 0.3A max
Output power:
25mw: 120mA @12v
200mw: 200mA @12v
500mw: 280mA @12v
800mw: 330mA @12v
Range: Up to 4km with omnidirectional RHCP antennas
Antenna connector: MMCX
Формат видео: NTSC/PAL
Port connector: JST,6pin
Dimensions: 36(W)x36(D)mm, 30.5×30.5mm(hole)
Weight:7.4g(excluding antenna)

Feartures:

All 40 standard channels
5V output for camera
2S-6S input power supported
LC filter allows ultra clean fpv video
0.01/25/200/500/800mW Switchable
Integrated with Uart, connectable to betaflight FC
0.01mW-Power up and test your system during a race with zero interference
Support parameter remotely adjusted by Betaflight, flight controller, OSD 5V BEC output, support power for receiver and camera
0.01mW-Power up and test your fpv system during a race with zero interference with any neighbor active channels
LED display for indicating CH/Band/Power

В комплект входят:
1 x 5.8Ghz 40CH 25mW/200mW/500mW/800mW Switchable FPV Transmitter
1x Antenna and cable set
1x Product manual

Примечание
Before powering the VTX up, it’s very important to first installed antenna otherwise the product will have static
The vtx can power up 5V camera @ under 300mA.