RTF 3 Axis 3Axis Brushless Gimbal SPECIFICATIONS
Используйте: Транспортные средства и игрушки с дистанционным управлением
Модернизация деталей/аксессуаров: Шестерня
Поставки инструментов: Измельченный
Технические параметры: Значение 3
Периферийные устройства/устройства дистанционного управления: ESC
Запчасти и принадлежности RC: Моторы
Номер модели: OEM
Материал: Металл
Атрибуты полного привода: Слот
Для типа автомобиля: Самолеты
Название бренда: Редитоски
RTF CNC FPV 3 Axis Brushless Gimbal W/ 2204 2805 Motor & Storm32 Controlller for DJI Phantom Walkera X350 Gopro 3 4 SJ4000 Xiaomixiaoyi
Описание:
Brushless gimbal
Особенности:
Color: black / silver
Axis: 3 axis gyro
Flight controller: Storm32
Motor : 2 pcs 2204 260kv & 1 pc 2805 140kv
Battery plug: JST
Weight: about 177.5±2 g
Compatible camera: Gopro 4,3,2 ; SJ4000 , Xiaomi xiaoyi camera( not included)
compatiable frame : DJI Phantom 1 2 / Walkera X350
Strom32 Gimbal Controller
Особенности:
board color: blue
motor drivers in DFN packages: yes
on-board MPU: yes
on-board bluetooth module: no
I2C plug type: picoblade (1.25mm JST)
I2C#2 plug type: picoblade (1.25mm JST)
pin headers: no
Included accessories:
MPU module
cable with connectors for MPU module
Points to note:
Firmware : 051
The pins on connector I2C#2 are reversed as with respect to connector I2C
ALL boards HAVE the diode required for running a bluetooth module!!!
ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ
supply voltage:3S battery
motor current: max. 1.5 A per motor
Comment: This is not yet fully exploited, motors with resistances of 12 Ohm , motors with 10 Ohm may be handled with care (see here andhere).
board dimensions: 50 mm x 50 mm, 45 mm bolt to bolt, holes Ø3 mm
Warm notice:
1. Recommended power supply is 12V(3s battery);
2, Camera must be fixed in the head (without any loosening);
3. Adjust the Gopro camera to the left or right,so that the camera is at Horizontal level;
4. Before camera fixed in the gimbal , please do not push ” on ” button to have power.
5,The gimbal camera must be use belt tight, otherwise it will have problems. And if you do this many times, it will cause damage to the flight controller.
В комплект входят:
– 1 x Aluminum gimbal installed 3 motors(assembled)
– 1 x Gimbal controller (2 kinds of board sent at random)
– 1 x Sensor
– 3 x servo wire(10cm)
– Wiring
( camera not included)
Please do not make any change in the board,if you make it broken and need to flash firmware,please ask us for software.
instruction the weight and size we marked in the package details is not actual information the goods . if you need to know the actual information please contact us country Del time Working days (not luding hol days)
Russian 
English 
Отзывы
Отзывов пока нет.