iFlight XING2 3110 900KV / 1250KV / 1600KV FPV Cinelifter Motor with 5mm titanium alloy shaft for FPV

Диапазон цен: $67.27 - $236.55

+ Бесплатная доставка
4pcs 1600KV1pc 1600KV4pcs 1250KV1pc 1250KV4pcs 900KV1pc 900KV
Очистить
- +
Артикул: Н/Д Категория:
Запросите дополнительную информацию

ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ

Колесная база: Нижняя пластина

Используйте: Транспортные средства и игрушки с дистанционным управлением

Модернизация деталей/аксессуаров: Рама

Поставки инструментов: Резка

Технические параметры: Значение 2

Размер: 38.72×24.6mm

Периферийные устройства/устройства дистанционного управления: Пульт дистанционного управления

Рекомендуемый возраст: 12+y

Запчасти и принадлежности RC: Моторы

Количество: 1 шт.

Происхождение: Материковый Китай

Номер модели: XING2 3110

Материал: Металл

Атрибуты полного привода: Сборка

Для типа автомобиля: Самолеты

Сертификация: CE

Название бренда: IFLIGHT

Описание

  • Our XING series NextGen motors have become popular after the initial release in 2018 and became the new standard on the market. Was it the curved shape or the internal damping ring to protect the bearing, or was it the higher quality NSK bearings coupled with a higher grade titanium alloy shaft? We’ve been copied and compared all these years, but now it’s time to set a new standard again! We’re finally ready to announce our predecessor the XING2!

  • The smooth, reliable and powerful XING motors were upgraded and we achieved an even higher standard in our manufactory as well as better performance than ever before. New center slotted N52H curved arc magnets were introduced to drastically reduce response time of the motor! Maybe the biggest bottleneck of our FPV flight controller is the motor due to it’s translation delay of it braking and accelerating. XING2 motors offer faster response to translate your PID loop quicker and get that locked-in feeling you were always looking for!

  • Due to the high quality materials used and the durable joint of bell and shaft, we were able to reduce the magnet air gap and stator lamination to a minimum. The smaller the air gap is, the lower that reluctance and the higher the magnetic flux (which is the magnetic analog of current) causing more efficiency and higher power!

  • Early 2018 we started to put o-rings on the top of our bearings between motor bell and stator. This acts as an absorber if your bell or shaft has gone through crashing and keeps the bearing gap tight to reduce all those vibrations induced by high rpms! It can also reduce the axial impact force just enough to keep your bearings smooth and quiet. All our experience, high quality 7075 bells, O-ring bearing protection and all the other features you’ve just seen on your original XING series are still inbuilt in a new shape and design!

Особенности:

  • 5mm titanium alloy shaft, our strongest prop shaft ever!

  • Crash resistant 7075 aluminum bell

  • Smooth and long-lasting NSK 11x5x5 bearings

  • Center slotted N52H curved arc magnets

  • XING O-ring bearing gap protection

  • Motor wires protector

  • Dynamically balanced

  • Designed for 7/8/9 inch Cinelifter.

Технические характеристики

  • Model: XING2 3110

  • KV: 900kv / 1250kv / 1600kv(as optional)

  • Пропеллерный вал: Резьба CW

  • Input Volts: 33.6V

  • Configuration: 12N14P

  • Stator Diameter: 38.72mm

  • Weight: 80g with short wire

  • Wire length: 18AWG 260mm

  • Монтажный шаблон: 19*19 мм

В комплект входят:

  • 1x XING2 3110 Brushless Motor

  • 4x M3x10 screws

  • 1x M5 Flange Nut

NOTE: Propellers not included!

XING2 3110 1600KV Nazgul 6*4*3 732

XING2 3110 1600kV KV 1600KV Weight (included wire) 76.4g Dimension: 72*24.6mm Interphase resistance: 36m2 Input Volts: 25.2V Peak Current: 65.06A Max Watt: 1550.4W Mounting Holes: 19*19-03mm Rotor specifications: Unibell Shaft Diameter: 4mm Shaft Protruding Length : 1Smm Lead: 260mm/18AWG Magnet: NSZH

Crash resistant 7075 aluminum bell Smooth and long-lasting NSK 11x5x5the smaller the air gap is, the lower that reluctance and the higher the

Цвет

4pcs 1600KV, 1pc 1600KV, 4pcs 1250KV, 1pc 1250KV, 4pcs 900KV, 1pc 900KV

Отзывы

Отзывов пока нет.

Будьте первым, кто оставил отзыв на “iFlight XING2 3110 900KV / 1250KV / 1600KV FPV Cinelifter Motor with 5mm titanium alloy shaft for FPV”

Ваш адрес email не будет опубликован. Обязательные поля помечены *

Корзина для покупок
ru_RURussian
iFlight XING2 3110 900KV / 1250KV / 1600KV FPV Cinelifter Motor with 5mm titanium alloy shaft for FPViFlight XING2 3110 900KV / 1250KV / 1600KV FPV Cinelifter Motor with 5mm titanium alloy shaft for FPV
Диапазон цен: $67.27 - $236.55Выберите параметры