,

GEPRC GEP-CL20 рама части пропеллер аксессуар - база Quadcopter Frame FPV Freestyle RC Racing Drone CineLog20 HD O3

$54.34

+ Бесплатная доставка
Название по умолчанию
Название по умолчанию
Очистить
Артикул: Н/Д Категории: ,
Запросите дополнительную информацию

GEPRC GEP-CL20 Frame Parts Propeller Accessory SPECIFICATIONS

Колесная база: Винты

Используйте: Транспортные средства и игрушки с дистанционным управлением

Модернизация деталей/аксессуаров: Адаптер

Поставки инструментов: Категория сборки

Размер: 1 дюйм

Периферийные устройства/устройства дистанционного управления: Рама

Рекомендуемый возраст: 12+y,14+y

Запчасти и принадлежности RC: Рама

Количество: 1 шт.

Тип пластика: ПК

Происхождение: Материковый Китай

Номер модели: GEP-CL20 Frame

Материал: Пластик

Атрибуты полного привода: Сборка

Для типа автомобиля: Вертолеты

Название бренда: GEPRC

GEPRC GEP-CL20 Frame Parts Propeller Accessory, GEPRC CineLog20 Smaller And Lighter Mainly For Indoor Shooting Under-

Резюме

The GEPRC team has newly developed a 2-inch frame: GEP-CL20. The 2-inch frame can be shuttled in a narrow space, and can be adapted to O3 VTX, and can also shoot shocking effects in a narrow space. The under-mounted gimbal can easily eliminate the high-frequency vibration and jello problems of the camera. Soft connection damping design of the camera gimbal and can also be mounted with a naked base, which supports the installation of Naked 8, Naked 10, Insta360 Go2 and compatible for DJI Action2 cameras.

The flight controller mouting hole spacing is 25.5mm*25.5mm, which is compatible with various VTX holes on the market with 20mm*20mm/25.5mm*25.5mm. The 9mm * 9mm motor mounting hole is used to install larger 12-13 series motors, and the compact body makes the flight more confident.

Технические характеристики

  • Model: GEP-CL20

  • Wheelbase: 100mm

  • Main plate: 2.5mm

  • Bottom plate: 1.5mm

  • Camera gimbal plate: 2.0mm

  • lens gimbal triangle plate : 1.5mm

  • Motor plate gasket: 2.0mm

  • FC mounting holes: 25.5mm x 25.5mm

  • VTX mounting hole: 20mm x 20mm /25.5mm x 25.5mm

  • Motor mounting hole: 9mm x9mm

  • FPV camera spacing: 20mm

  • Suitable propeller size: 2 inch propeller

  • Weight: 53.4g

  • Flight controller: GEP-F4-35A AIO (mounting hole: 25.5mm×25.5mm)

  • Motor: 1303.5 (mounting hole: 9mm×9mm)

  • ESC: 35A

  • Propeller: 2 inch

  • Recomended Battery: 4S 660mAh

Характеристика

1. Combining aesthetics and engineering for compact design

2. Designed to mount a shock-absorbing gimbal under the independent FPV camera to reduce jello of FPV Goggles image.

3. 2 inch pusher design, small size and lightweight, more suitable for complex and narrow environments flight shooting.

4. SPEEDX2 1303.5 5500KV motor with Emax four-blade propellers make the flight shooting unhurried.

5. Design the outer EVA damping ring to effectively reduce the impact force.

Включает

Plate:

1 x Main plate: 2.5mm

1 x Bottom plate: 1.5mm 

1 x Camera gimbal plate: 2.0mm  

1 x lens gimbal triangle plate : 1.5mm

1 x Motor plate gasket: 2.0mm

Screw package:

4 x M2*1.9-OD4.9 self-clinching nut-brass color M2 

1 x 7075 Aluminum Column M23.528

1 x 7075 Aluminum Column M23.525

1 x Single-ended bright-edge aluminum column M23.528

1 x Single-ended bright-edge aluminum column M23.525

2 x Round head screw with pad M2*8

18 x Round head screw M2*8

4 x Round head screw M2*5

6 x Round head screw M2*4 X6

10 x Round head screw M2*12

4 x Round head screw M2*16

4 x Half-round head M1.6*8 X4

18 x Round head screw M2*7

10 x self-clinching nut M2

10 x Nylon nut M2

4 x Nylon column M2*5mm

4 x Camera head shock absorbing rubber ring

5 x Lens head vibration dampening rubber

4 x BEC silicone gasket

3D printed parts:

1 x VTX Antenna printout PJ000065 (large port)

1 x VTX Antenna printout GP105633 (small port)

1 x Receiver mount 3D printout (vertical)

1 x Receiver mount 3D printable (lying)

1 x TBS Antenna mount

1 x Lens printout (1 hole model)

1 x Lens printout (2 holes) 

Injection molded parts:

4 x Propeller guard

Other accessories:

1 x Naked 8 base

1 x 4S Naked power cable (with balanced terminal head)

2 x Cinelog20 battery anti-slip pad (square)

2 x Cinelog20 tripod shock pad (square)

4 x EVA edge protection cotton CineLog20 protection cotton

2 x Receiver antenna wand 100mm

2 x Battery tie M15*150

1 x L-shaped screwdriver 1.5MM

2 x 3M double-sided adhesive

1 x Keychain
GEPRC GEP-CL20 Frame Parts Propeller Accessory, GEPRC Cinelogzo Smaller and lighter, mainly for indoor shooting 0

GEPRC Cinelogzo Smaller and lighter, mostly for indoor shooting 0l A Under-mounted camera Compatible with EVA damping Compatible with various Camera gimbal Pusher Design for vibration reduction 03 Air Unit protective cotton mounting holes of VTX soft connection 6o79ui3 8

GEPRC GEP-CL20 Frame Parts Propeller Accessory, Camera shock-absorbing Gimbal Optimized camera stabilisation shooting with under-mounted vibration

Camera shock-absorbing Gimbal Optimized camera stabilisation shooting with under-mounted vibration dampening platform 8

GEPRC GEP-CL20 Frame Parts Propeller Accessory, Pusher Design Compared with the traditional normal motor; it has better flight efficiency and improved battery

Pusher Design Compared with the traditional normal motor; it has better flight efficiency and improved battery

GEPRC GEP-CL20 Frame Parts Propeller Accessory, Aircraft Grade Aluminum Parts Aluminum parts using aircraft 7075 material the fuselage is more solid

Aircraft Grade Aluminum Parts Aluminum parts using aircraft 7075 material the fuselage is more solid .

GEPRC GEP-CL20 Frame Parts Propeller Accessory, True-X Frame Design Stable and flexible flight attitude Cinelog20GEPRC GEP-CL20 Frame Parts Propeller Accessory, High Toughness Material Injection Molding Propeller Guard Safer flight and effective prevention of

High Toughness Material Injection Molding Propeller Guard Safer flight and effective prevention of propeller collisions .

GEPRC GEP-CL20 Frame Parts Propeller Accessory, Frame Exhibition 024-5 Guea 5x150GEPRC GEP-CL20 Frame Parts Propeller Accessory, the under-mounted gimbal can easily eliminate the high-frequency vibration and jGEPRC GEP-CL20 Frame Parts Propeller Accessory, 8 [ 133mm 100mm Cinelog20 GEARGEPRC GEP-CL20 Frame Parts Propeller Accessory, GEP-CL20 Wheelbase: 100mm Main plate: 2.5mm Bottom plate: 1.5GEPRC GEP-CL20 Frame Parts Propeller Accessory, the under-mounted gimbal can easily eliminate the high-frequency vibration and j

Название

Название по умолчанию

Отзывы

Отзывов пока нет.

Будьте первым, кто оставил отзыв на “GEPRC GEP-CL20 Frame Parts Propeller Accessory – Base Quadcopter Frame FPV Freestyle RC Racing Drone CineLog20 HD O3”

Ваш адрес email не будет опубликован. Обязательные поля помечены *

Корзина для покупок
ru_RURussian
ЗаполнительGEPRC GEP-CL20 рама части пропеллер аксессуар - база Quadcopter Frame FPV Freestyle RC Racing Drone CineLog20 HD O3
Открытый чат