,

3DR Radio V5 Telemetry - 433Mhz 915Mhz 100MW/500MW воздушный и наземный модуль передачи данных с OTG кабелями для APM 2.8 /Pixhawk 2.4.8

Диапазон цен: $15.25 - $132.58

+ Бесплатная доставка
XBEE for APMXBEE for PIXHAWKRadioV5 915Mhz1000MWRadioV5 915Mhz500MWRadioV5 915Mhz100MWRadioV5 433Mhz1000MWRadioV5 433Mhz500MWRadioV5 433Mhz100MWRadioV1 915Mhz500MW 1RadioV1 915Mhz500MWRadioV1 915Mhz100MWRadioV1 433Mhz1000MWRadioV1 433Mhz500MWRadioV1 433Mhz100MWWifi for APMWifi for PIXHAWK
Очистить
Запросите дополнительную информацию

3DR Radio V5 Telemetry SPECIFICATIONS

Колесная база: Нижняя пластина

Используйте: Транспортные средства и игрушки с дистанционным управлением

Модернизация деталей/аксессуаров: 3DR RADIO

Поставки инструментов: Аккумулятор

Технические параметры: Значение 6

Периферийные устройства/устройства дистанционного управления: Пульт дистанционного управления

Рекомендуемый возраст: 12+y,14+y

Запчасти и принадлежности RC: Передатчики

Происхождение: Материковый Китай

Номер модели: 3DR RADIO V5

Материал: Композитный материал

Атрибуты полного привода: Сборка

Для типа автомобиля: Самолеты

Название бренда: TEAEGG

We have tested the radio telemetry and can connect normally. We have uploaded the firmware. Please do not upload the firmware. Different firmware will cause the firmware to be incompatible. Please do not modify the parameters. Wrong parameters may not work.

Wifi Telemetry can be used for PIXHAWK or APM flight controller,it is same as 3DR radio telemetry.

wifi Telemetry for APM is used for APM flight controller.

wifi Telemetry for pixhawk is used for pixhawk 2.4.8

Radio V5 Telemetry is new type, Either one can be used as ground or air terminal

3DR Radio V5 Telemetry, V5 has interchangeable functions, it can be used as ground terminal or air terminal .

V5 has interchangeable functions, it can be used as ground terminal or air terminal: V5 Radio Talemetry Radio Tale

3DR Radio V5 Telemetry, [4] [1] [2] [3] Radio Talemet

3DR Radio V5 Telemetry, Wifi Telemetry Module 6 Winbi HodeL ESP8266MOD

WiFi Telemetry Module for 2.4GHz, featuring ESP8266 module, supports ISM protocol, with a data transmission rate of 6Pa (#z5d0m), compatible with firmware versions 802.11b/e/0.8.

3DR Radio V5 Telemetry, 100MW/500MW Air and Ground Data Transmit Module with OTG cables for APM3DR Radio V5 Telemetry -

Stock Number: 4554044. This product is an ISA (Internal Starter Assembly) version 2.8, featuring ESP-8266 module, with AGHI model, from vendor Aun, part number 015d06. Includes 7 cables.

3DR Radio V5 Telemetry, default baud rate of Radio Telemetry is 57600 , not 1152003DR Radio V5 Telemetry, if there is a driver problem, download from here:pix.rcto3DR Radio V5 Telemetry, 100MW/500MW Air and Ground Data Transmit Module with OTG cables for APM3DR Radio V5 Telemetry, Store No: GND GND VS 4o44adio Telemetry 3DR Radio V5 Telemetry, USB cable cannot be used for radio telemetry transmission .

3DR Radio V5 Telemetry, Wifi Telemetry can be used for PIXHAWK or APM flight3DR Radio V5 Telemetry, USB cable cannot be used for radio telemetry transmission .3DR Radio V5 Telemetry SPECIFICATIONS Wheelbase : Bottom Plate

XBEE S2C Radio telemetry

3DR Radio V5 Telemetry, XBEE S2C Radio Telemetry 3DB antenna 1ODB antenna External antenna

3DR Radio V5 Telemetry, use 3DR Power Module or 5V ESC to supply power to flight control .3DR Radio V5 Telemetry, use 3DR Power Module or 5V ESC to supply power to flight control .

How to use Radio Telemetry For PIXHAWK flight controller?

1.use 6P line connects to pixhawk flight controller.

3DR Radio V5 Telemetry, mamidji Spektrum DSM receiver pivwwk Telemetry (

Due to the different firmware, some firmware, two ports can be used, some firmware can only use one of the ports. So find one of the available ports for the connection.

IF you use PX4 firmware ,only TELEM1 can be used ,can not use TELEM2.

IF you use ardupilot firmware, find one of the available ports for the connection.

2.Please note:

  1. When using Radio Telemetry connection, it must use 3DR Power Module or 5V ESC to supply power to the flight control. USB cannot be inserted because USB priority is higher than Radio Telemetry . If USB cable is plugged in, it cannot be used for radio telemetry transmission.

  2. The default baud rate of the Radio Telemetry is 57600, not 115200. Select the correct COM port and do not select AUTO.

  3. If there is a driver problem, download from here:pix.rctoysky.com/CP210x_VCP_Windows.rar

3DR Radio V5 Telemetry SPECIFICATIONS Wheelbase : Bottom Plate

Цвет

XBEE for APM, XBEE for PIXHAWK, RadioV5 915Mhz1000MW, RadioV5 915Mhz500MW, RadioV5 915Mhz100MW, RadioV5 433Mhz1000MW, RadioV5 433Mhz500MW, RadioV5 433Mhz100MW, RadioV1 915Mhz500MW 1, RadioV1 915Mhz500MW, RadioV1 915Mhz100MW, RadioV1 433Mhz1000MW, RadioV1 433Mhz500MW, RadioV1 433Mhz100MW, Wifi for APM, Wifi for PIXHAWK

Отзывы

Отзывов пока нет.

Будьте первым, кто оставил отзыв на “3DR Radio V5 Telemetry – 433Mhz 915Mhz 100MW/500MW Air and Ground Data Transmit Module with OTG cables for APM 2.8 /Pixhawk 2.4.8”

Ваш адрес email не будет опубликован. Обязательные поля помечены *

Корзина для покупок
ru_RURussian
3DR Radio V5 Telemetry - 433Mhz 915Mhz 100MW/500MW Air and Ground Data Transmit Module with OTG cables for APM 2.8 /Pixhawk 2.4.83DR Radio V5 Telemetry - 433Mhz 915Mhz 100MW/500MW воздушный и наземный модуль передачи данных с OTG кабелями для APM 2.8 /Pixhawk 2.4.8
Диапазон цен: $15.25 - $132.58Выберите параметры