Рама

Wheelbase: 215mm

Arm thickness: 5mm

X plate thickness: 2mm

Толщина нижней пластины: 2 мм

Upper plate thickness: 2mm

Receiver

Frsky XM+ or R-XSR Receiver

2307 2450kV Brushless Motor (Gold)

Motor kv: 2450rpm/v

No-load current (IO/10V): 2.1A

Support lithium battery section: 3-4S

Weight: 39.5 grams

Maximum continuous current: 52A

Maximum continuous power: 830W

Maximum thrust: 1337g (4s/5″)

Configuration: 12N/14P

Motor resistance (Rm): 0.0386Ω

Stator diameter: 23mm

Stator Thickness: 7mm

Motor Diameter: 28.5mm

Motor length: 19.7mm

Overall shaft length: 34.2mm

Shaft thickness: M5

Mounting hole spacing: 16mm

Mounting screw: M3

Recommended propeller: 5-6 inches

32-bit 50A 3-6S Dshot1200 4IN1 ESC

Continuous current: 50A

Peak current: 60A (10s)

Input voltage: 3-6s

BEC: none

Current meter: yes

Main control chip: STM32F051

Mos tube chip: TPH1R403

Firmware: Blheli_32

Support DSHOT150/300/600/1200/MULTISHOT/PWM/ONESHOT

MOS: 5×6

Weight: 13.5g

Mounting hole: 30.5×30.5mm /Φ3

Size: 49×37mm

Customized LAL-F405 Bluetooth Flight Controller

STM32F405 master

MPU: MPU6000 (via SPI)

Input voltage: support 2-6S Lipo input

Onboard Bluetooth module, support APP configuration through smartphone

Firmware: MATEKF405

Onboard German Bosch BMP280 high-precision barometer

The flight controller has an onboard OSD chip, supports DMA mode (uses F4 MCU to control the OSD), and can use the BetaFlight parameter adjustment software

software adjustment parameters

Built-in 5v/2A; 10V/2A BEC output

Reserve MicroSD BlackBox

Reserve 5 serial ports and I2C interfaces for GPS access (Bluetooth occupies TX5.RX5)

Support multiple types of receivers (such as: SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS, PPM, etc.

type of receiver)

It has an LED programming signal output port, supports programmable LED strips, and can adjust the strip color and flashing mode through the flight controller

Has a voltage monitor port (BAT) and a current monitor port (CRT) to monitor battery voltage and current (requires additional power

flow meter)

With buzzer output port, support external alarm buzzer for sound warning or notification of aircraft flight status

Onboard 10V BEC, providing a cleaner image display effect for video transmission

All interfaces have socket and pad options, suitable for different groups of people at the same time

Support betaflight/inav racing firmware

Size: 37x37mm

Mounting hole: 30.5×30.5mm

Weight: 5.9g

CADDX flat head camera

Product name: Ratel

color: red

Lens: 2.1mm

Image sensor: 1/1.8 inch starlight HDR sensor

Horizontal resolution: 1200TVL

FOV: 180 degrees

minimum. Latency: 8ms

TV system: NTSC and PAL (can be changed)

Image: 16:9 and 4:3 (can be changed)

WDR: Super WDR (HDR)

Minimum Lighting: Starlight

Sync: Internal

Electronic shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000

Signal-to-noise ratio: > 60dB (AGC OFF)

Video output: CVBS

Camera OSD: Separate OSD

DNR: 3-DNR

Language: ENG / FRANCE / RUS / SPA / PU / KOREA / CHN / JAPAN

Day/Night: Auto/Color/B&W/External

Size: 19mm*19mm*19mm

Wide power input: DC 5-40V

Operating temperature: -20℃～+60℃

Working humidity: 20%~80%

Weight: 8g (net) / 40.5g (gross)

TX805 FPV Transmitter VTX

Item name: FPV transmitter VTX

Frequency: 5.8g

Channel: 40ch

Input voltage: 7V-24V

5V camera power supply: 120MA (MAX)–12V@25MW

5V camera power supply: 200MA (MAX)–12V@200MW

5V camera power supply: 300MA (MAX)–12V@600MW

5V camera power supply: 350MA (MAX)–12V@800MW

Additional Features: Smart Audio

Power supply: camera 5V/3A output

Output power: 25MW/200MW/600MW/800MW switchable

Разъем для антенны: MMCX

Cable Connector: Pad

Size: 36mm*22mm*5mm, 30.5 stackable holes

Weight: 8g (without antenna)

Racerstar 5046 propeller

Specifications: 5046*3

Brand Name: Racerstar

Product name: 5046 propeller

Material: imported German Bayer PC

Quantity: 4 pairs (8 pieces)

Color: transparent

Weight: 5.1g/pc

Center thickness: 7mm

Spiral diameter: 127mm

F405 Bluetooth Flight Controller Configure and tune your betaflight settings from your phone via the SpeedyBee APP (X))

The TX805 Smart Audio FPV Transmitter features a frequency range of 5.8 GHz, with four output channels (4OCH) and adjustable power output levels of 25mW, 2oomW, 6oomW, or BOOMW, allowing for switchable frequencies between 6900 and 6980 MHz.

Specs: KV1850, throttle rating: 100, voltage: 25.2V, current: 40A, power ratio: 1.49, ESC power output: 960W, battery type: 6S1500 (runtime: approximately 4.9 minutes).

The frame kit features a smooth, blackened edge design with seamless integration. It includes two heat-treated YFS screws made from 12.9-grade CNC-crafted aluminum, which provides hardness and durability. The entire drone has been chamfered for a non-slip texture, ensuring a broad, stable platform.

This product includes a fixed mount part for receiver and antenna, designed to provide camera protection. Please note that the GoPro Hero 7/8 camera itself is not included in this kit.

Equipped with shock-absorbing soft rubber, this drone effectively eliminates the impact of vibrations on flight.