, ,

FPV 2 Axis CNC Brushless Camera Gimbal w/Motor Controller for Gopro SJ4000 SJ7000 camera DJI Phantom Walkera QX350 Aerial photo

$48.04

+ Бесплатная доставка
BLACKSILVER
BLACK
SILVER
Очистить
Артикул: Н/Д Категории: , ,
Запросите дополнительную информацию

FPV 2 Axis CNC Brushless Camera SPECIFICATIONS

Используйте: Транспортные средства и игрушки с дистанционным управлением

Модернизация деталей/аксессуаров: Адаптер

Инструментальные принадлежности: Резка

Технические параметры: Значение 2

Пульт дистанционного управления Периферийные устройства/устройства: Ресиверы

RC Parts & Accs: Motor Components

Происхождение: Материковый Китай

Номер модели: Gimbal

Материал: Металл

Полный привод Атрибуты: Сборка

Для типа автомобиля: Самолеты

FPV 2 Axis CNC Brushless Camera Gimbal w/Motor Controller for Gopro SJ4000 SJ7000 camera DJI Phantom Walkera QX350 Aerial photo

В комплект входят:
– 1 x Aluminum gimbal installed 2 motors (assembled)
– 1 x BGC Gimbal controller and sensor
– 1 x Pitch cable for reciver VR channel control the pitch by transmitter.
Описание товара
Особенности:
– Simple structure and light weight,CNC aluminum alloy structure
– Brushless motor direct drive
– With anti-vibration rubber balls,easy to adjust
– Compatible with Gopro 3,2,1
– with 2pcs 2208 motors and BGC 2.0 gimbal controller,sensor(The BGC 2.0 controller is more better than V3 controller,it’s more stable.
– with motor protector which can help heat dissipation
– Gimbal weight:210g(not including camera)
this is RTF version,you only need connect the battery on the plug,then it can work directly.
the Gimbal work alone,it don’t need the NAZA support,very easy for use.
if you need use the pitch or roll control by phantom stock radio system,you need buy one more this receiver:
.
we have flashed the firmware,and adjust each one.
please make sure the Gopro Camera install the plate good,and let it stay on the horizontal position,
then connect the power plug with the 3S lipo battery charge plug,and wait 1-2 minutes,the frame will work good,you can test if you turn or shake,the Gopro 3 can keep horizontal position dynamically.
You should install your gopro camera first,then hold the gopro level by your hand ,when you connect battery.after 1-2 minutes,Release the hand,the gopro gimbal will work good.

Require battery

 

FPV 2 Axis CNC Brush 3s 11.1V 2200mAh 25C Battery High power Li-po battery for RC helicopter rc airplane rc drone quadcopter USD 17.9/piece

DJI phantom CNC brushless PTZ

high power Li-po battery for RC helicopter rc airplane drone . USD

this is RTF version,you only need connect the battery on the plug,then it

FPV 2 Axis CNC Brushless Camera Gimbal w/Mo

Цвет

BLACK, SILVER

Отзывы

Отзывов пока нет.

Будьте первым, кто оставил отзыв на “FPV 2 Axis CNC Brushless Camera Gimbal w/Motor Controller for Gopro SJ4000 SJ7000 camera DJI Phantom Walkera QX350 Aerial photo”

Ваш адрес email не будет опубликован. Обязательные поля помечены *

Корзина для покупок
ru_RURussian
ЗаполнительFPV 2 Axis CNC Brushless Camera Gimbal w/Motor Controller for Gopro SJ4000 SJ7000 camera DJI Phantom Walkera QX350 Aerial photo
Открытый чат