• A super-efficient iFlight 7.5inch Long-Range bird that can go where you couldn’t go before and can carry bigger batteries to get the flight time to surf the swiss alps if you want! A super stiff frame for minimum resonance and XING2 2809 motors for maximum 7.5inch prop control. Fly big batteries top-mounted, or even bigger batteries bottom mounted, 6cells recommended or 5cells for slow cruising. But whatever style you fly, a Lipo or Lion pack will just do the job. Recommended 5S 3.000mAh above (slow cruising) or 6S 2.500mAh above

HIGHLIGHTS:

• Battery voltage LED status light (illuminated Rabbit logo on the bottom)

• Battery voltage LED status light (illuminated IF logo on the bottom)

• 360° TPU protection, cam protection and antenna mounts
• GoPro TPU bottom stand (GoPro protector not included)
• Lightweight Side Panels Design – Keep Your Rig Clean
• No props in view
• XING2 2809 1250KV efficient wide stator motors

• GPS pre-installed for more safety at a distance

• 6mm rigid arm design for more stiffness

• Top- and bottom battery mount option

• Brand new color of TPU print parts

• Rabbit logo on the top plate

PRE-TUNED & PRE-SETUP:

• Is this your first BNF or are you just starting through with FPV? This article might probably help: General Guide // iFlight BNF
  

• Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

• To restore lost tunes or updates, please check our linked article on “Firmware/Factory Dumps”

• Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!

• Please check our linked article on “How to disable Angle-Mode, activate Acro-Mode”

• GPS Rescue is OFF by default to prevent from unwanted or unexpected drone behaviour.

• Please check our linked article on“GPS Rescue Mode // Setup”
  

Specifications:

• Weight: 695g (without battery and GoPro mount)
  

• Total Dimensions: 258*200mm (body dimension)

• Upper(middle) Plate Thickness: 3mm

• Bottom to Top Distance: 20-29mm

• ESC: BLITZ E55 4-IN-1 2-6S ESC

• Camera Plate Thickness: 3mm
  

• Bottom Plate Thickness: 3mm

• Top Plate Thickness: 3mm
  

• Geometry:  DC (DeadCat)

• HQ 7.5X3.7X3 Propellers
  

• Arm Thickness: 6mm

• XING2 2809 1250KV

• FC: BLITZ F722

Video Transmission

• Product Name: RUNCAM LINK Wasp

• FPV Cam :RunCam Wasp

• Dimensions:

• Runcam Link: L19mm*W19mm*H19mm

• FPV Cam: L29mm * W29mm * H13mm

• Communication Frequency: 5.725-5.85GHz

• Transmission Power (EIRP):  FCC/SRRC/MIC: <20dBm;  CE: <14dBm

• Input Volts：14-26.4 V

• Weight: 23.5 g

• Image Sensor: 1/3.2”

• Resolution: 720P@120fps

• LENS： FOV D:155° H:125° V:96°

• Coaxial Cable:  120 mm

• Audio Transmission：Yes

Chimera7 Pro HD BNF Included Components and Parts

• 1 x Rabbitfilms Chimera7 Pro 6S HD

• 1 x Battery pad

• 2 x 7 inch Prop(Pairs)

• 2 x Battery strap

• 1 x Screw bag

Note:

• All iFlight BNFs are tested before shipment to guarantee highest quality. 

• If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com.

• iFlight takes no responsibility for issues with DJI or Caddx 3rd party gear (Video transmitters, Goggles, Radios, etc) and must be directly reported to www.caddxfpv.com/pages/contact-us or www.dji.com/support.