SPECIFICATIONS

Wheelbase: Bottom Plate

Use: Vehicles & Remote Control Toys

Upgrade Parts/Accessories: Frame

Tool Supplies: Battery

Technical parameters: Value 2

Size: 113mm

Remote Control Peripherals/Devices: Remote Controller

Recommend Age: 12+y

RC Parts & Accs: Antennas

Quantity: 1 pcs

Origin: Mainland China

Model Number: ProTek R25 HD

Material: Carbon Fiber

Four-wheel Drive Attributes: Assemblage

For Vehicle Type: Airplanes

Certification: CE

Brand Name: IFLIGHT

Description:

PRE-TUNED & PRE-SETUP:

  • Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

  • To restore lost tunes or updates, please check our linked article on“Firmware/Factory Dumps”

  • Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!

  • Please check our linked article on “How to disable Angle-Mode, activate Acro-Mode”

ProTek R25 BNF Specs:

  • Motor: XING 1404 4600KV

  • Weight: 147.5g (without battery)

  • Bottom plate thickness: 2.5mm

  • Top plate thickness: 1.5mm

  • Body Size: 143mm*158mm

  • FC pattern: 25.5*25.5mm

  • FPV cam spacing: 14mm

  • Whoop F4 AIO 1.1

  • Propeller size: 2.5 inch

  • Arm Thickness: 2.5mm

  • Wheelbase: 113mm

Specifications:

AIO//Whoop AIO F4 V1.1 AIO

  • Mounting pattern: 25.5*25.5mm/φ3mm

  • Firmware Target: IFLIGHT_F411_PRO

  • Constant current: 20A,25A (Burst)

  • Config:IFLIGHT_F411_PRO.config

  • Connector: Micro-USB

  • ESC Firmware: Q-H-15

  • Current sensor: yes

  • BEC output: 5V 2A

  • ESC Telemetry: NO

  • Size: 30.5*30.5mm

  • MCU: STM32F411

  • BLHeli: BLHeli-S

  • Barometer: NO

  • Blackbox: 8MB

  • Gyro: BMI270

  • INA pad: nR2

  • Weight: 7.4g

  • Input: 2-4S

ProTek R25 HD Quad BNF Included Components and Parts

  • pre-built and tested Quadcopter

  • 1 x ProTek R25 Frame

  • 1 x Caddx Nebula pro Nano Vista System Kit 

  • 1 x Albatross ipex LHCP 5.8g 75mm antenna

  • 2 x Nazgul 2525 propeller (Set of 4 – Color May Vary)

  • 1 x iFlight Lipo Strap 15*180mm (Color May Vary)

Important

The DJI Remote Controller is recommended for beginners since you won’t need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don’t choose to use the DJI Remote Controller, you can choose a receiver option for your transmitter and then bind to your own radio as usual.

  • Our current frsky receivers default version in 2.XX, requires to use the same version of frsky transmitter. 

  • If you have none frsky transmitter,please downgrade the version lower than 2.X.X, www.frsky-rc.com for more details.

Note:

  • All iFlight BNFs are tested before shipment to guarantee highest quality. 

  • If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com.

  • iFlight takes no responsibility for issues with DJI or Caddx 3rd party gear (Video transmitters, Goggles, Radios, etc) and must be directly reported to www.caddxfpv.com/pages/contact-us or www.dji.com/support

Title

Default Title

Reviews

There are no reviews yet.

Be the first to review “iFlight ProTek R25 FPV Drone – HD BNF with Nebula pro Nano Vista / ELRS 2.4G for FPV”

Your email address will not be published. Required fields are marked *

Shopping Cart