SPECIFICATIONS
Wheelbase: Bottom Plate
Use: Vehicles & Remote Control Toys
Upgrade Parts/Accessories: Frame
Tool Supplies: Battery
Technical parameters: Value 2
Size: 240mm 5inch
Remote Control Peripherals/Devices: Remote Controller
Recommend Age: 12+y
RC Parts & Accs: Antennas
Quantity: 1 pcs
Origin: Mainland China
Model Number: Nazgul5 V2 Analog
Material: Carbon Fiber
Four-wheel Drive Attributes: Assemblage
For Vehicle Type: Airplanes
Certification: CE
Brand Name: IFLIGHT
Description：
Nazgul5 V2 is a 5″ size BNF (Bind-and-Fly) quadcopter. it is updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don’t worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!
Tips:
VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you’re flying legal frequencies and use our prepared Betaflight VTX tables according to your region.
HIGHLIGHTS:
5mm arm design for more durability
Easy-Swap arms
LED illuminated Logo
XING-E Pro 2207 motors and NAZGUL F5 props
5″ version also fits 5.1″ style propellers
Popular True-X configuration
TPU crash-guards
Fits both 30.5x and 20x stacks
XL5 V5 frame specs:
BLITZ E45S 4-IN-1 45A 2-6S ESC
BLITZ F7 Flight Controller V1.1
XING-E Pro 2207 FPV Motor（6S 1800kv )
Wheelbase: 240mm*240mm
Body size: 170*170mm
Propeller size: 5 inch /5.1 inch
FC pattern: 30.5*30.5/20*20 mm
FPV cam spacing: 19mm
Weight: 393.4g (without battery)
PRE-TUNED & PRE-SETUP:
Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
To restore lost tunes or updates, please check our linked article on“Firmware/Factory Dumps”
Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!
Please check our linked article on“How to disable Angle-Mode, activate Acro-Mode”
Prebuilt and tested Quadcopter
1x XL5 V5 Frame
1x RaceCam R1 Mini 1200TVL 2.1mm 19*19
1x Albatross RHCP SMA 5.8g antenna
2sets x Nazgul 5 inch 3-blades (Set of 4 – Color may vary)
1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)
Changelog:
May 31st,2021: Before SucceX-E F4 Stack changed to SucceX-E F7 Stack.
June,2021: Before Caddx Ratel camera changed to RaceCam R1 Mini camera.
February 2022: Before SucceX-E F7 flight controller changed to BLITZ F7 flight controller.
April 2022: Before SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC changed to BLITZ E45S 4-in1 ESC
October 2022:Before SucceX Force 5.8g 800mW VTX changed to BLITZ 1.6W VTX
FC // BLITZ F7 Flight Controller V1.1
MCU: STM32 F722
Gyro: BMI270
Barometer: DPS310
OSD Chip: AT7456E
Flash: 32MB (Blackbox flash)
UARTS: 6
Motor outputs: 4x (SH1.0 connector)
I2C serial: SDA / SLA pads
Smartaudio / IRC Tramp VTX protocol supported
LED controller: Yes
Beeper pad: Yes
Firmware target: IFRC-IFLIGHT_BLITZ_F722
Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter
Dimensions: 36.5*35 mm
Weight: 7.8g
ESC // BLITZ E45S 4-IN-1 45A 2-6S ESC
Supports: DShot150/300/600/MultiShot/ OneShot etc.
Mounting Holes: 30.5*30.5mm/Φ4mm
Supports 2-6S lipo input
Telemetry Output: NO
Target: QH-40 16.7
Current sensor: Yes
Constant: 45 Amps
Current rate: 200
Burst: 55 Amps
Weight: 14.7g
MCU: BB21
BEC: NO
VTX// BLITZ 1.6W VTX Adjustable
Stable output power
4 Power levels up to 1600mW;
40 Channels (including Raceband)
Fast frequency lock, no startup interference with other pilots
Built-in output power self-check functionality
VTX telemetry with IRC Tramp protocol
Specs:
Input voltage: 7V～36V
Interface: MMCX
Power levels: PIT/25mW/400mW/800mW/1600mW
Channels: 40 (including Raceband)
Mounting pattern: 30.5×30.5mm/Φ3
Lightweight: 18.9g (excluding antenna)
VTX telemetry: IRC Tramp
Betaflight IRC Tramp Configuration: Please download the attached VTX table for Betaflight!
All our VTX tables can also be found here: LINK
IRC Tramp VTX table values: 25mW/400mW/800mW/1600mW
Additional Suggested Parts（not include）
Battery 6S 1300mAh
GoPro Mounts
Important:
Our current frsky receivers default version in 2.XX, requires to use the same version of frsky transmitter.
If you have none frsky transmitter,please downgrade the version lower than 2.X.X, www.frsky-rc.com for more details.
Reviews
There are no reviews yet.