FlySky FGr8B – 2.4GHz 8CH AFHDS 3 PWM/PPM/i-bus Output Micro RC Receiver for PL18 NB4/Lite RC Car Boat FPV Racing Drone Parts

+ Free Shipping

This product is currently out of stock and unavailable.

SKU: N/A Category:

FlySky FGr8B SPECIFICATIONS

Use: Vehicles & Remote Control Toys

Remote Control Peripherals/Devices: Receivers

Recommend Age: 12+y,14+y

RC Parts & Accs: Receivers

Quantity: 1 pcs

Origin: Mainland China

Model Number: FGr8B

Material: Composite Material

For Vehicle Type: Cars

FGr8B

FlySky FGr8B, FGrBB 3025 303 472 TZ50557 on Mysky-

FlySky FGR8B, Part Number: 3025-303, Serial Number: TZ50557, Mysky-15503, ES03-630503, tested successfully during flight.

FlySky FGr8B, flysky_rc_model IPX4 347am+R9123 FLY

FlySky RC Model IPX4, Part Number: R9123, Product Name: FLYSKY Ltd., Barcode: 160068*#, Serial Number: 70162-16/F, Tel.: (85)0753-6006, Address: Shennan Road, Shenzhen, China.

FlySky FGr8B, the FGr8B uses a single-antenna bidirectional transmission system

The FlySky FGR8B employs a single-antenna bi-directional transmission system, specifically designed for installing and outputting PWM, PPM, and i-bus signals.

FlySky FGr8B, FGr8B Adaptive transmitter: all transmitters supporting AFHDS3

The FlySky FGR8B transmitter features AFHDS3 technology, compatible with various transmitters including PL18, NB4, and NB4 Lite, among others. Specifications: Frequency: 2.4GHz; Protocol: single antenna; Input Power: 3.5-9V; Data Output: PWM, PPM, i-bus; Operating Temperature: -10°C to +60°C; Humidity Limit: 20%-95%; Online Update: Yes. Dimensions: 35mm x 23.3mm x 13.3mm; Weight: 9.4g; Certification: CE and FCC compliant.

FlySky FGr8B 2.4GHz 8CH AFHDS 3 Micro RC Receiver PWM/PPM/i-bus Output Compatible PL18 NB4/Lite for RC Car Boat

OVERVIEW:
The FGr8B receiver adopts Flysky’s third-generation automatic frequency hopping digital system (AFHDS 3).It uses a single-antenna bidirectional transmission system and is uniquely designed to install and output PWM/PPM/ i-bus in signals. It supports all AFHDS3 transmitter and RF modules.

Description:
Brand Name: FlySky
Item Name: FGr8B Receiver
Model: FGr8B
Weight: 9.4g
Dimensions: 35*23.3*13.3mm
RF: 2.4GHz
2.4G Protocol: AFHDS 3
Antenna: Single Antenna
Input Power: 3.5-9V
RSSI: Support
Data Output: PWMPPMi-bus in
Temperature Range: -10℃—+60℃
Humidity Limit: 20%-95%
Online Update: Yes
PWM Channels: 7 (Version 2.0 will be upgraded to 8 channels)
Certification: CE,FCC ID:N4ZFGR8B
The FGr8B receiver is compatible with all AFHDS 3 transmitters and RF modules (including PL18, NB4, NB4 Lite, FRM302 etc.)

Binding:
1. Press and hold the receiver BIND button [11] while powering on the receiver, release the BIND button after receiver is powered on, the
LED [12] on the receiver will flash rapidly;
2. Put the transmitter into bind mode;
3. The binding process is complete when the LED on the receiver stops flashing and is on continuously.
– If a transmitter that has had its radio frequency (RF Standard) set to “AFHDS3 1 way” (please refer to your transmitter user manual)

enters bind mode, the receiver LED will instead flash slowly. Exit bind mode on the transmitter and if the receiver LED stops flashing

and is on continuously, the binding process is complete.

4. Check to make sure the transmitter and receiver functions are working correctly, repeat steps 1 to 3 (binding process) if any problems arise.

Forced update:
If after a firmware update is performed and the transmitter is unable to bind to the receiver, the receiver may need to be put into forced update times.

1. Power on the receiver while pressing the BIND button [11] for then approximately ten seconds until the LED [12] flashes three times,release the BIND button.

2. Go to the RX Setup menu on your transmitter and select “RX Update”.

3. When the receiver LED flashes slowly, the update is successful.

Failsafe:
This function protects your vehicle by preventing unexpected behaviors in cases of signal lost.

1. Users should always input Fail Safe parameters before operating their vehicles. If the Fail Safe function has not been set on the transmitter and signal lost occurs, the receiver will continue to operate and maintain all output value at the last received instructions from the transmitter. If the Fail Safe parameters on the transmitter has set been set, the receiver will set output values according to user parameters during signal lost.

Package Included:
1 x FGr8B Receiver

Title

Default Title

Reviews

There are no reviews yet.

Be the first to review “FlySky FGr8B – 2.4GHz 8CH AFHDS 3 PWM/PPM/i-bus Output Micro RC Receiver for PL18 NB4/Lite RC Car Boat FPV Racing Drone Parts”

Your email address will not be published. Required fields are marked *

Shopping Cart