SPEZIFIKATIONEN

Radstand: Schrauben

Verwenden Sie: Fahrzeuge und ferngesteuertes Spielzeug

Upgrade-Teile/Zubehör: ESC

Werkzeug-Zubehör: Batterie

Technische Parameter: Wert 2

Größe: heavy lift drone motors

Fernsteuerung Peripheriegeräte/Geräte: Fernsteuerung

Empfehlen Alter: 14+y

RC Teile & Zubehör: Propeller

Herkunft: Festland China

Modellnummer: U11 II KV120

Material: Metall

Eigenschaften des Allradantriebs: Motoren

Für Fahrzeugtyp: Flugzeuge

Markenname: T-MOTOR

ARRIVAL U11-II-Efficiency improvement by 5% *Optimal structure *Sine wave features *Military grade high-temperature resistant enamelled wires 8 IN 0Y DESIGNMAADACTURE KV12O FCC(RoHs Uwi-I 1 1 L T-MoTOR ‘CHINA MADE

We’ve achieved a 4% increase in thrust and a 2% increase in flight time, according to data collected using a 12-cell battery configuration with a 26-inch propeller.

The U11-II features military-grade high-temperature resistant winding, allowing it to withstand higher current demands and deliver improved performance in extreme environments. This design enables extended service life with up to a 30% increase in maximum power output. Additionally, its ordinary magnet, curved magnet, and arc magnet designs provide strong magnetic properties and even gaps for smooth motor operation.

The specifications for the N42UH motor are as follows: continuous current rating (C): 180; maximum torque (kGs): 12.9-13.5; nominal output power (KOe): 42-46 MGOe; temperature coefficient of resistance (T): 1.29-1.35; and air gap inductance (kAIm): 955-995 [kjlm].

The original dust-proof network and grid structure effectively protects the motor’s iron core, ensuring a safe flight. The motor is securely fastened in place using screws, while washers and circlips provide additional reliability during operation.

The motor features a silicon steel sheet with a thickness of 0.2mm, which significantly reduces iron loss and heat generation for enhanced efficiency. Additionally, the motor benefits from electrophoresis technology and high-temperature coating to provide robust protection against rusting and corrosion. Furthermore, the motor has undergone rigorous testing, including salt spray tests, to ensure its resistance to anti-rust treatment.

For easy installation, note that the motor weighs only 35g and features a location pin that should not be forgotten during assembly. Additionally, the propeller screw size is M3x1mm, and you’ll need four screws for installation. The CPC (U7-038) dimensions are 32mm x 10mm x 3mm.

KV120 Weight (Incl. Cable) 772g Motor Dimensions 079.5*51.6 mm Interna Resistance 80+5mn Lead 14# AWG 1250mm Configuration 12N14P Shaft Diameter 15mm Rated Voltage(Lipo) 125 Idle Current(24v) 1.5A Peak Current(1 80s) 57.3A Max. Power 2783W Recommendation FLAME 8OA HV+G26*8.5″

If you are missing any information, please contact our online customer service by leaving a message at [email protected].