TAGS: FPV Drone, fpv racing drone, HD FPV Drone, iFlight, iFlight Taurus X8 Pro, iFlight Taurus X8 Pro BNF, iFlight Taurus X8 Pro drone, iFlight Taurus X8 Pro price, iFlight Taurus X8 Pro review, RC Drone,rc drone bnf
iFlight Taurus X8 Pro Features
- Big size XING2 3110 // Die Power-Motoren mit extremem Auftrieb und Flugleistung
- 8x single X-Class grade ESC motor drivers for more reliability
- 8S power system // More power and speed
- Redundant iFlight ESC Commander PCB // Power distribution board with high capacitance, filtering and heat dissipation
- GPS-Modul vorinstalliert (BF GPS-Rettung oder INAV GPS RTH-Funktion verfügbar)
- Universelle Kamerahalterung und Zubehör für eine breite Palette von Kameras zu installieren
PRE-TUNED & PRE-SETUP
- Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
- Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!
- To restore lost tunes or updates, please check our linked article on “Firmware/Factory Dumps”
- GPS Rescue is ON by default. Please check our linked article on “GPS Rescue Mode // Setup”
- Please check our linked article on “How to disable Angle-Mode, activate Acro-Mode”
| iFlight Taurus X8 Pro Specification |
|---|
| Marke: | iFlight |
| Modell | Taurus X8 Pro |
| GPS Module | iFlight M8Q-5883-GPS & Compass V2.0 (LINK) |
| Total Dimensions | 430mm*350mm (body dimension) |
| Upper(middle) Plate Thickness | 3.5mm |
| Bottom Plate Thickness | 3.5mm |
| Top Plate Thickness | 3mm |
| Arm Thickness | 8mm |
| Radstand | 450mm |
| Propeller Size | 8 Zoll |
| Motor | XING2 3110 900KV |
| Controller | BLITZ F7 Pro Flight Controller |
| Gewicht | 2.3kg±5g (without battery) |
| FC // BLITZ F7 Pro Flight Controller |
|---|
| Mount Pattern | 35*35mm / 4mm PCB hole diameter |
| Smart audio/IRC Tramp VTX protocol | Unterstützung |
| Firmware Target | IFLIGHT_BLITZ_F7_PRO |
| BlackBox | 512MB Onboard |
| Abmessungen | 41*41.5mm |
| BEC | 5V/2.5A, 12V/2A |
| Barometer | DPS310 |
| OSD Chip | AT7456E |
| LED controller: | Ja |
| MCU | STM32 F722 |
| Beeper Pad | Ja |
| Kreisel | MPU6000 |
| UARTS | 6 |
| Gewicht | 17g (±2) |
| ESC // 2 x iFlight ESC Commander PCB (8x SucceX X80A) |
|---|
| Dshot600, Proshot, Oneshot, Multishot | Unterstützung |
| Firmware Target | iFlight-BL32-PRO |
| 48kHz PWM Frequency | Unterstützung |
| Mounting Pattern | 40*17mm |
| Constant | 80A/Burst: 100A |
| Capacitance | 470uF/35V |
| BlHeli32 Telemetry | Ja |
| Current Sensor | Ja |
| Input | 2-8S LIPO |
| MCU | F051 |
| BEC | Nein |
| Gewicht | 8.1g |