Beschreibung：

• Our all new 2.5inch project is finally ready for all you content creators or those guys who like to wear some protection every now and then. Prop protection is what we’re talking about here…

• ProTek is not necessarily just a Cinewhoop series but far more. Equipped with our popular XING 1404 motors in a higher kv class will give you all the power you need to get good speed, do some freestyle or carry a full GoPro through tiny gaps.

• A lot of thought was put into the different assembly options. Our stock BNF will ship in the standard configuration but you can either do a pusher mod (flip the build upside down) or a lite mod (remove the protective plastic for weight optimization).

• Durable plastic protectors with copper standoffs, portable compact design, easy accessable UBS port without disassembly, LED battery status, lost model buzzer and a universal GoPro TPU for a full size or naked GoPro. If you wanna go extra light, get one of our 5V balance plug GoPro power cables to get rid of the internal battery.

• Need a naked GoPro case or mount? Checkout our new iFlight naked GoPro Hero8 TPU case to use with your ProTek25.

Tipps:

• VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you’re flying legal frequencies and use our prepared Betaflight VTX tables according to your region.

Merkmale:

• UPGRADED PROP GUARDS V2.0 (Material optimized)

• Keine Requisiten oder Rahmen in Sicht!

• RaceCam R1 Mini 1200TVL 2.1mm 19*19

• High performance Whoop AIO F4 V1.1 AIO Board to save weight and space

• T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)

• Leichtes, einteiliges Rahmendesign (weniger flexibel, starrer, langlebiger)

• Resonanzarme Rahmenkonstruktion (weniger Wackelpudding, mehr Kinofilme)

• Butter smooth XING 1404 4600KV motors

• Vorgestimmt mit sanften Freestyle-Einstellungen

VORGESTIMMT UND VOREINGESTELLT:

• Machen Sie sich keine Gedanken über das Tuning, das haben wir bereits für Sie erledigt! Ein grundlegendes PID- und Filter-Tuning wurde für ein großartiges Flugerlebnis angewendet!

• Um verlorene Melodien oder Updates wiederherzustellen, lesen Sie bitte den verlinkten Artikel über"Firmware/Fabrik-Dumps"

• Der Angle-Mode (Selbstausgleichsmodus) ist standardmäßig aktiviert, damit Ihr erster Flug nicht in einem Chaos endet!

• Bitte lesen Sie unseren verlinkten Artikel über"Winkelmodus deaktivieren, Akromodus aktivieren"

• Whoop AIO F4 V1.1 AIO

• Motor: XING 1404 4600KV

• Wheelbase: 114mm

• Body Size: 91*68.7mm

• Dicke der Bodenplatte: 3mm

• Dicke der oberen Platte: 2mm

• Top and bottom plate spacing: 24mm (aluminum standoff height)

• Propeller size: 2.5 inch

• FC pattern: 25.5*25.5mm / 20*20mmmm

• FPV cam spacing: 20mm

• Weight: 194.3g (without battery)

ProTek25 Quad BNF Included Components and Parts

• pre-built and tested Quadcopter

• 1x ProTek25 Frame

• 1x RaceCam R1 Mini 1200TVL 2.1mm 19*19

• 1x Albatross LHCP RP-SMA 5.8g Antenne

• 2x Nazgul 2525 propeller (Set of 4 – Color May Vary)

• 2x iFlight Lipo Strap 15*200mm (Color May Vary)

• 1x Naked GoPro TPU bottom stand black (Naked GoPro Protector not included)

CHANGELOG:

• 2021-03-01: VTX upgraded with different hardware. Same performance, upgraded TPU installation.

• 2021-06: RunCam Nano2  2.1MM NTSC 4:3 changed to RaceCam R1 Micro 1200TVL 1.8mm 14*14

• August 2021: RaceCam R1 Micro 1200TVL 1.8mm 14*14 changed to RaceCam R1 Mini 1200TVL 2.1mm 19*19

FC + ESC AIO //  Whoop AIO F4 V1.1 AIO

• Size：30.5*30.5mm

• Mounting pattern：25.5*25.5mm/φ3mm

• Weight: 7.4g
  

• Connector：Micro-USB

• MCU：STM32F411

• Gyro：BMI270

• Blackbox：8MB

• BEC  output: 5V 2A

• INA pad：nR2

• Barometer：no

• Constant current：20A，25A（Burst）

• Input：2-4S

• Current sensor：yes

• BLHeli：BLHeli-S

• ESC Telemetry：no

• Firmware Target：IFLIGHT_F411_PRO

• ESC Firmware：Q-H-15 /Bluejay Q-H-50 (Bluejay)