SPEZIFIKATIONEN
Radstand: Untere Platte
Verwenden Sie: Fahrzeuge und ferngesteuertes Spielzeug
Upgrade-Teile/Zubehör: Rahmen
Werkzeug-Zubehör: Batterie
Technische Parameter: Wert 2
Größe: 7.5inch
Fernsteuerung Peripheriegeräte/Geräte: Fernsteuerung
Empfehlen Alter: 12+y
RC Teile & Zubehör: Antennen
Menge: 1 Stück
Herkunft: Festland China
Modellnummer: Chimera7 Pro Analog
Material: Kohlefaser
Eigenschaften des Allradantriebs: Assemblage
Für Fahrzeugtyp: Flugzeuge
Zertifizierung: CE
Markenname: IFLIGHT
Introducing what has been requested for too long already! A super-efficient iFlight 7inch Long-Range bird that can go where you couldn’t go before and can carry bigger batteries to get the flight time to surf the swiss alps if you want! A super stiff frame for minimum resonance and XING2 2809 motors for maximum 7inch prop control. Fly big batteries top-mounted, or even bigger batteries bottom-mounted, 6cells recommended or 5cells for slow cruising. But whatever style you fly, a Lipo or Lion pack will just do the job. Recommended 5S 3.000mAh above (slow cruising) or 6S 2.500mAh above.
GPS functionality to find your way back and Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behavior; Setup instructions included). Vertical and horizontal TBS Crossfire antenna mounts are included to cover you and your antenna dead-ends just in case. GoPro universal TPU bottom stand included; fits your original GoPro bracket and our TPU GoPro protectors (additional).
Main Changelog from Chimera7 to Chimera7 Pro:
SucceX-D F7 V2.2 Stack (F7+50A ESC) upgraded to BLITZ F722 Stack (F7 V1.1 + 55A 4in1 ESC)
New Lightweight Side Panels Design – Keep Your Rig Clean
XING 2806.5 upgraded to XING2 2809 1250KV
7-inch frame upgraded to 7.5inch
HIGHLIGHTS:
Battery voltage LED status light (illuminated IF logo on the bottom)
- GoPro TPU bottom stand (GoPro protector not included)
- Lightweight Side Panels Design – Keep Your Rig Clean
- XING2 2809 1250KV efficient wide stator motors
GPS pre-installed for more safety at a distance
360° TPU protection, FPV cam protection
6mm rigid arm design for more stiffness
Top- and bottom battery mount option
VORGESTIMMT UND VOREINGESTELLT:
Is this your first BNF or are you just starting through with FPV? This article might probably help: General Guide // iFlight BNF
Machen Sie sich keine Gedanken über das Tuning, das haben wir bereits für Sie erledigt! Ein grundlegendes PID- und Filter-Tuning wurde für ein großartiges Flugerlebnis angewendet!
Um verlorene Melodien oder Updates wiederherzustellen, lesen Sie bitte den verlinkten Artikel über "Firmware/Fabrik-Dumps"
Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!
Bitte lesen Sie unseren verlinkten Artikel über "Winkelmodus deaktivieren, Akromodus aktivieren"
GPS Rescue ist standardmäßig ausgeschaltet, um unerwünschtes oder unerwartetes Verhalten der Drohne zu verhindern.
Bitte lesen Sie unseren verlinkten Artikel über"GPS-Rettungsmodus // Einrichtung"
Spezifikationen:
Weight: 695g (without battery and GoPro mount)
Total Dimensions: 258*200mm (body dimension)
Upper(middle) Plate Thickness: 3mm
Bottom to Top Distance: 20-29mm
Bottom Plate Thickness: 3mm
Camera Plate Thickness: 3mm
Top Plate Thickness: 3mm
Geometry: DC (DeadCat)
HQ 7.5X3.7X3 Propellers
Armdicke: 6mm
XING2 2809 1250KV
FC: BLITZ F722
ESC: BLITZ E55 4-IN-1 2-6S ESC
ELECTRONICS // BLITZ F7 Stack (F7 V1.1 + 55A 4in1 ESC):
FC // BLITZ F722 Flight Controller
Montagemuster: 30,5*30,5mm / 4mm PCB-Lochdurchmesser
Smartaudio / IRC Tramp VTX Protokoll unterstützt
Firmware target: IFLIGHT_BLITZ_F722
Motorausgänge: 4x (SH1.0-Anschluss)
Flash: 32MB (Blackbox-Flash)
I2C seriell: SDA / SLA-Pads
Abmessungen: 36,5*35 mm
Barometer: DPS310
OSD-Chip: AT7456E
LED-Steuerung: Ja
MCU: STM32 F722
Piepser-Pad: Ja
Kreisel: BMI270
Gewicht: 7,8 g
UARTS: 6
ESC // BLITZ E55 4-IN-1 2-6S 55A ESC
Unterstützt: DShot DShot150/300/600/MultiShot/OneShot usw.
Befestigungslöcher: 30,5*30,5mm/Φ4mm
Target: IFLIGHT_BLITZ_G2
Supports 2-6S Lipo input
Stromsensor: Ja
Konstant: 55 Ampere
Derzeitiger Satz: 200
Burst: 65 Amps
Weight: 15.3g
MCU: G071
BEC: Nein
Betaflight IRC Tramp Configuration: Please download the attached VTX table for Betaflight!
IRC Tramp VTX table values: 25mW/400mW/800mW/1600mW
Power levels: PIT/25mW/400mW/800mW/1600mW
All our VTX tables can also be found here: LINK
Lightweight: 18.9g (excluding antenna)
Mounting pattern: 30.5×30.5mm/Φ3
Channels: 40 (including Raceband)
VTX telemetry: IRC Tramp
Input voltage: 7V~36V
Interface: MMCX
Chimera7 Pro Analog BNF Included Components and Parts
4 x HQ 7.5X3.7X3 CW propeller + 4 x HQ 7.5X3.7X3 CCW (Color may vary)
1 x RaceCam R1 Mini 1200TVL 2.1mm 19*19 camera
1 x Albatross RHCP 5.8GHz SMA FPV Antenna
2 x iFlight Lipo Strap 20*300mm (Black)
1 x Pre-built and Tested Chimera7 Pro
Tipps:
VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you’re flying legal frequencies and use our prepared Betaflight VTX tables according to your region.













