• The iFlight BumbleBee HD V3 BNF features the amazingCaddx Polar Vista Digital HD System which makes flying truly breathtaking. 

• The whole frame was reduced to a minimum size and weight. We came up with a 145mm diagonal motor distance for our new V3 to fit the Caddx Unit inside.

• But there’s much more this time. NEW motor size and NEW software engineered ducts to increase power and decrease noise. Yeah, you heard right! FINALLY a CineWhoop without that high pitch noise waking up the last sleeping dogs in your whole neighborhood….

• No broken PLA Ducts anymore! Brand new lightweight Polycarbonate duct profile for minimum disturbance to channel thrust and efficiency.

• Small space? Tight gaps? Indoor safety? But you need that 4K? Well, here goes your GoPro!

• There’s always that customer that has this indoor project but just want to get footage in 4K. Here’s the BNF you need to get the job done!

• You have this location you wanna fly in, but no way you’d fly your standard razor blades around you or your friends?

• Do you just love the style and the fact that “props just won’t break that often”? … GO FOR IT!

• R81-SPI Frsky (Compatible W/ Frsky ACCST D8）

Main Changelog from V2 to V3:

• 4S 1408 3600KV upgraded to 2203.5 3600KV(Φ12/M2)

• 6S 1408 2800KV upgraded to 2205 2300KV

• SucceX-A F4 AIO upgraded to Beast F7 55A AIO

• Upgraded polycarbonateducts for less noise and more durability

• Upgraded EVA protectors

Änderungsliste:

• June,2021: Before Beast STD F7 changed to Beast F7 45A AIO.

• July,2021 : Beast F7 45A AIO changed to Beast F7 55A AIO

Merkmale:

• Keine Requisiten oder Rahmen in Sicht!

• High performance True-AIO Board Beast F7 55A to save weight and space

• T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)

• Leichtes, einteiliges Rahmendesign (weniger flexibel, starrer, langlebiger)

• Resonanzarme Rahmenkonstruktion (weniger Wackelpudding, mehr Kinofilme)

• Butter smooth 4S XING 2203.5 3600KV/ 6S2205 2300KVmotors

• Bumper prop guards to protect sensitive environment or yourself

• Vorgestimmt mit sanften Freestyle-Einstellungen

VORGESTIMMT UND VOREINGESTELLT:

• Machen Sie sich keine Gedanken über das Tuning, das haben wir bereits für Sie erledigt! Ein grundlegendes PID- und Filter-Tuning wurde für ein großartiges Flugerlebnis angewendet!

• Um verlorene Melodien oder Updates wiederherzustellen, lesen Sie bitte den verlinkten Artikel über"Firmware/Fabrik-Dumps"

• Der Angle-Mode (Selbstausgleichsmodus) ist standardmäßig aktiviert, damit Ihr erster Flug nicht in einem Chaos endet!

• Bitte lesen Sie unseren verlinkten Artikel über"Winkelmodus deaktivieren, Akromodus aktivieren"

• Beast F7 55A BLHeli-S true AIO board

• Motor:4S XING 2203.5 3600KV/ 6S2205 2300KV

• Wheelbase: 145mm

• Body Size: 111*93mm

• Dicke der Bodenplatte: 2,5 mm

• Dicke der oberen Platte: 2mm

• Top and bottom plate spacing:27mm(aluminum standoff height)

• Propeller size: 3 inch

• FC pattern: 20*20mm，30.5*30.5mm

• FPV-Nocken-Abstand: 19mm

• Weight: 355.6g (without battery)

BumbleBeeHD Quad BNF Included Components and Parts

• pre-built and tested Quadcopter

• 1x BumbleBee HD V3 Frame

• 1xCaddx Polar Vista Digital HD System Kit

• 2xAlbatross LHCP RP-SMA 5.8g antenna

• 1x TPU Bracket for DJI Air Unit Module

• 1x TPU Antenna holder for DJI antenna

• 2x TPU camera side plate soft mount

• 2x Nazgul 3040 propeller (Set of 4 – Color May Vary)

• 2x MMCX to RP-SMA Female Adapter Cable

• 1x iFlight Lipo Strap

Recommendation of battery

• Fullsend 4S 95C 1300mAh（5-6 minutes flight time w/GoPro Hero8）

• Fullsend 4S 95C 1550mAh（6-7 minutes flight time w/GoPro Hero8）

• FULLSEND 6S 1050mAh

Additional Suggested Parts

• DJI HD FPV Goggles V2

• Funk-Controller

• DJI Remote Controller (Mode 2)

Wichtig

The DJI Remote Controller is recommended for beginners since you won’t need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don’t choose to use the DJI Remote Controller, you can choose a receiver option for your transmitter and then bind to your own radio as usual.

• Unsere aktuelle frsky-Empfänger Standard-Version in 2.XX, erfordert die Verwendung der gleichen Version von frsky Sender. 

• Wenn Sie keinen Frsky-Sender haben, führen Sie bitte ein Downgrade auf eine niedrigere Version als 2.X.X durch, www.frsky-rc.com für weitere Details.

• Barometer can only be used with Betaflight 4.3.0 and above!