Beschreibung：

FC // BLITZ F7 V1.1 Flight Controller

Obere Merkmale:

• Improved circuit design, better components and lower electrical noise!

• DJI HD VTX Connector (Plug-and-Play / No soldering required)

• FC indicator LEDs for visual debugging

• With LC filter

Änderungsliste:

• 2022/Feb: Version updated to V1.1 / Gyro changed to Bosch BMI270 due to availability & price issues with MPU6000.
  

Spezifikationen:

• MCU: STM32 F722

• Kreisel: BMI270

• Barometer: DPS310

• OSD-Chip: AT7456E

• Flash: 32MB (Blackbox-Flash)

• UARTS: 6

• Motorausgänge: 4x (SH1.0-Anschluss)

• I2C seriell: SDA / SLA-Pads

• Smartaudio / IRC Tramp VTX Protokoll unterstützt

• LED-Steuerung: Ja

• Piepser-Pad: Ja

• Firmware-Ziel: IFRC-IFLIGHT_BLITZ_F722

• Montagemuster: 30,5*30,5mm / 4mm PCB-Lochdurchmesser

• Abmessungen: 36,5*35 mm

• Gewicht: 7,8 g
  

Wiring suggestion:

• UART 1 for VTX HD / Analog

• UART 2 for a Receiver

• UART 3/4/5 for GPS or other sensors that require a serial port

• UART 6 for ESC Telemetry
  

Tipps

• 1. F722 MCU has an inner inverter.

• 2. SBUS、CRSF、ELRS、IBUS、DSM ETC… can be connected to any unused UART_RX，we suggest you connect to Uart_RX2

• 3. Frsky SmartPort，Tramp & Smartaudio can be connected to any unused UART_TX，we suggest you connect to Uart_TX1

• 4. F.port can be connected to any unused UART_TX，we suggest you connect to Uart_TX2

ESC // BLITZ E55 4-IN-1 2-6S ESC

Spezifikation:

• Befestigungslöcher: 30,5*30,5mm/Φ4mm

• Weight: 15.3g

• Unterstützt 2-6S Lipo-Eingang

• MCU：G071
  

• Konstant: 55 Ampere 

• Burst: 65 Amps

• Stromsensor: Ja

• BEC: Nein

• Derzeitiger Satz: 200
  

• Unterstützt: DShot DShot150/300/600/MultiShot/OneShot usw.

• Target: IFLIGHT_BLITZ_G2
  

PACKAGE INCLUDED:

• 1PC X BLITZ F7 FLIGHT CONTROLLER

• 1PC X BLITZ E55 4-IN-1 2-6S ESC

• 1SET X SILICON GROMMETS

• 1SET X WIRE HARNESS FOR F7 FLIGHT CONTROLLER