GEPRC MARK4 7-inch Analog FPV Drone SPECIFICATIONS
Garantie: 3 Monate
Warnung: Minderjährige bitte unter Aufsicht eines Erwachsenen verwenden
Auflösung der Videoaufzeichnung: 2K QHD,Andere
Art: HELICOPTER
Stand der Versammlung: Bereit zum Mitnehmen
Ferne Entfernung: 2000 Meter
Fernbedienung: Ja
Empfohlenes Alter: 12+j,14+j
Stromquelle: Elektrisch
Stopfen Typ: XT60
Das Paket enthält: Originalverpackung, Kamera, Bedienungsanleitung
Herkunft: Festland China
Operator Skill Level: Anfänger, Fortgeschrittene, Experten
Modellnummer: GEPRC MARK4 7-inch Analog FPV
Material: Kohlefaser, Kunststoff, Metall
Verwendung im Innen-/Außenbereich: Innen und Außen
Flugzeit: 20 Minuten
Merkmale: App-gesteuert, FPV-fähig, Sonstiges
Abmessungen: 7 Zoll
Controller-Modus: MODUS1,MODUS2
Controller-Batterie: Nicht inbegriffen
Steuerkanäle: 8 Kanäle
Spannung aufladen: 14.8V
Aufladezeit: 30 Minuten
Zertifizierung: CE
Kamerahalterung Typ: Feste Kamerahalterung,Sonstiges
Markenname: GEPRC
Luftbildaufnahmen: Nein
Merkmal
1. Classic and attractive appearance
2. Adopt RAD 5.8G 1.6W high-power VTX to ensure stable and reliable signal
3. With GEPRC E2806.5 1350KV motor, it is recommended to use 6S battery to ensure strong output
4. Using F405 flight controller and BLheli_S 45A ESC with stable performance, the overall performance is stable and the hand feels comfortable
5. Using Caddx H1 camera, good visual experience
Spezifikation
- Model: MARK4 7-inch FPV
- Frame: GEP-MK4-7
- Radstand: 295mm
- Top plate: 3mm
- Bottom plate: 3mm
- Armplatte: 5 mm
- Splint plate: 2mm
- FC: GEPRC F405 V2
- ESC: SPAN 45A BLHeli_S
- MCU: STM32F405RGT6
- Kreisel: ICM-42688-P
- OSD: Betaflight OSD w/AT7456E chip
- VTX: GEPRC RAD 5.8G 1.6W
- Kamera: Caddx H1
- Antenna: Momoda 5.8G RHCP SMA
- Motor: GEPRC E2806.5 1350KV
- Propeller: Gemfan 7037-3
- Weight: 455g
- Receiver: PNP/ TBS NanoRX / GEPRC ELRS24 / GEPRC ELRS 915
- Recommended battery: Lipo 6S 2600mah-4200mah / Lion 6S 6000mah
- Flight time: 12-30 minutes
Enthält
1 x MARK4 7-inch Analog FPV
4 x Gemfan 7037-3(pair)
2 x M20*250mm Battery straps
2 x Batterie-Silikon-Pads
1 x Satz Schrauben
1 x L-förmiger Schraubendreher 1,5 mm
1 x L-shaped screwdriver 2mm
1 x M5 Wrench










