SPEZIFIKATIONEN
Radstand: Schrauben
Verwenden Sie: Fahrzeuge und ferngesteuertes Spielzeug
Upgrade-Teile/Zubehör: Adapter
Werkzeug-Zubehör: Kategorie Montage
Größe: 1 Zoll
Fernsteuerung Peripheriegeräte/Geräte: Empfänger
Empfehlen Alter: 12+y
RC Teile & Zubehör: Board
Menge: 1 Stück
Herkunft: Festland China
Modellnummer: GEPRC ELRS Nano Receiver
Material: Metall
Eigenschaften des Allradantriebs: Assemblage
Für Fahrzeugtyp: Hubschrauber
Markenname: GEPRC

Zusammenfassung:
GEPRC ELRS Nano receiver is a new generation remote control system developed based on the ExpressLRS open source project. ExpressLRS sets new standartds for long-range connection, low latency and maximum refresh rate of 500hz.
GEPRC ELRS Nano receivers are available in 915/868MHz and 2.4GHz versions with maximum refresh rate of 500Hz and can be used with GEPRC ELRS-series products or other ELRS-compatible devices.
Spezifikationen:
Size: 17mm*11mm
Weight: 0.6g(receiver only)
Frequency band: 915MHz FCC/868MHz EU/2.4GHz ISM
Input voltage:5V
Antenna connector: ipex1
Merkmale:
1. Small size
2. 0.6g weight
3. WIFI Upgrade firmware
4. ELRS open source project, remote control
5.The operation is simple
Inklusive Paket:
1 x Receiver
1 x T antenna
2 x Heat shrink tube
4 x Silicone cable(black, red, yellow, green)
1 x Pin (4pin)
1 x Instruction manual
LED Status indication

LED Status Indicators: Solid ON – Indicates a connection has been established. Flashing Slowly – No TX signal detected. Flashing Quickly – WIFI mode enabled. Double Flash Quickly – Binding in progress.



To use the RX_Serial feature, configure a serial port via the ‘Ports’ tab and select a Serial Receiver Provider.













