Zusammenfassung

From progress to evolution, a comprehensive reconstruction of the previous generation of design. Finally we come to the Cinelog25 V2 version.

This upgrade of Cinelog25 V2 has launched three video transmission versions, the most important of which is the O3 Air Unit video transmission version. Based on the O3 Air Unit’s built-in anti-shake requirements for fuselage shock, the Cinelog25 V2 can achieve excellent anti-shake effects by matching the camera damping ball.

It is redesigned to be fixed with aluminum parts and cable ties, which is convenient for battery replacement. The flight system uses the new TAKER G4 35A AIO with 1404 4500KV motors and HQ DT63mmX4 propellers for excellent flight performance.Install the propeller guard which can effectively prevent people from being injured due to flight mistakes.Equipped with GPS M10 chip, quickly search for satellites.

Cinelog25 V2 is a 2.5-inch high-definition FPV that integrates indoor and outdoor flying. Developed by the GEPRC team,the flight feels delicate and the experience is good.

Merkmal

1. Add O3 Air Unit image transmission version,ultralight weight within 250g.Fit with FAA flight standards.

2. The O3 cemera design is independently attached to the shock-absorbing gimbal to solve the camera IMU resonance problems and achieve the best video anti-shake effect.

3. Designed aluminum parts with cable ties to facilitate the change of batteries.

4. Use the new TAKER G4 35A AIO, has better computing power.ESC over-current protection makes it stable and reliable.

5. Design propeller guard, which can effectively prevent people from flight mistakes.

6. The fuselage is small and compact, suitable for indoor and outdoorMounting Naked GoPro8 to shoot beautiful videos.

Spezifikationen

• Model:Cinelog25 V2 Analog Quadcopter

• Frame: GEP-CL25 V2

• Wheelbase: 114mm

• Kardanische Platte: 2,0 mm

• Obere Platte: 2,5 mm

• Untere Platte: 2,0 mm

• FC system: TAKER G4 35A AIO

• MCU:SMT32G473CEU6

• Kreisel: ICM 42688-P

• OSD: Betaflight OSD w/AT7456E

• ESC: 8Bit 35A

• VTX: GEPRC RAD 5.8G 1W (UFL)

• Kamera: Caddx Ratel2

• Antenna: GEPRC Peano 5.8G RHCP UFL

• Motor: SPEEDX 1404 4500KV

• Propeller: HQProp DT63mm*4

• weight: 148g±5g

• Receiver: PNP / GEPRC ELRS24 / TBS Nano RX

• Recommended battery:LiPo 4S 660mah-850mah

• Flight time: 4′00″ -6′ 00″

Enthält

1 x Cinelog25 V2 Analog Quadcopter

2 x HQProp DT63mm*4(2pairs)

1 x  Battery strap M15*200mm

1 x  Battery strap M15*150mm

2 x Batterie-Silikon-Pads

1 x Satz Schrauben

1 x L-shaped screwdriver 1.5MM

1 x Keychain

1 x Naked Camera GP8 base

1 x T-type Antenna mount

GEPRC Cirielog 25 v2 03 Air Urit Free to fly arid sfiooting arywfiere 109 13 G4 Weight-249g FPV Camera 03 Air Unit New TAKER G4 AIO Optimize Battery Naked GoPro8 Damping Ball Fixation Camera 8 1 61d433 249

The independent camera damping ball enhances stability, while the FPV screen provides an exceptionally clear and smooth visual experience.

GEPRC Cinelog25 V2 Analog Taker G4 features an operating frequency of 17MHz, with higher computing power and redundancy. Additionally, it comes equipped with a 4K/60fps HD-stabilized air unit version, allowing for smooth and high-quality video recording.

The Link Wasp offers a cost-effective HD solution, featuring an analog version with 5.8GHz analog image transmission and a maximum power output of 1W.

The air unit allows for immediate video production, or you can equip it with a naked GoPro8 Black camera and use the built-in editing software to create your content.

Introducing our new design TPU mats, which replace traditional EVA mats. These compact and durable mats offer improved performance and reliability.

Featuring customized 7075 aluminum columns made from aviation-grade aluminum alloy, which provides exceptional strength and durability, unlike common steel materials that may be prone to damage.

The GEPRC Cinelog25 V2 Analog kit features a 5.8G 1W camera, Runcam Wasp Caddx Ratel2 antenna, and original Ankenna designed for optimal performance. The system also includes a 5.86GHz LHCP UFL gpcp receiver with PNP built-in compatibility with DJI receivers.

The kit features a lightweight design, weighing in at just 250g. It includes an HMv6 motor, along with other components such as ESCs, propellers, and a 4S LiHV battery pack featuring a capacity of 720mAh and a discharge rate of 100C.