SPEZIFIKATIONEN

Name: F450 450mm Quadcopter Frame Kit w/ APM2.8 Flight Controller 7M GPS 30A Simonk ESC 2212 920KV Flysky FS-i6 IA6 For RC Quadcopter - Drone
Availability: InStock

Radstand: Untere Platte

Verwenden Sie: Fahrzeuge und ferngesteuertes Spielzeug

Upgrade-Teile/Zubehör: Rahmen

Werkzeug-Zubehör: Schneiden

Technische Parameter: Wert 6

Fernsteuerung Peripheriegeräte/Geräte: Fernsteuerung

Empfehlen Alter: 12+y

Empfehlen Alter: 14+y

RC Teile & Zubehör: Landing Gear

Herkunft: Festland China

Modellnummer: F450 450mm Quadcopter Frame Kit APM2.8 Module built-in Compass

Material: Zusammengesetztes Material

Eigenschaften des Allradantriebs: Motoren

Für Fahrzeugtyp: Flugzeuge

Markenname: Readytosky

F450 Frame

Merkmale:

Built from quality glass fiber and polyamide nylon.

Integrated PCB connections for direct soldering of your ESCs

Pre-threaded brass sleeves for all of the frame bolts.

Colored arms for orientation to keep you flying in the right direction.

Large mounting tabs on main frame bottom plate for easy camera mounting.

Easy assembly.

Technische Daten:

Width: 450mm

Height: 55mm

Weight: 280g (w/out electronics)

Motor Mount Bolt Holes: 16/19mm

G.Weight: 395g

Wheelbase: 17.7in/450mm

Net weight: 272g

Markenname: FlySky

Item Name: FS-i6 transmitter

Channel: 6

Model Type: fixed wing/helicopter/glider

Channel resolution: 1024 steps

Low voltage warning: less than 4.2v

ANT length: 26 x 2mm( dual antenna)

Weight: 392g

Battery: 6v 1.5AA x 4(not included)e

Size: 174 x 89 x 190 mm

Farbe: schwarz

Certificate: CE ,FCC

RF specification:

RF Range: 2.405 – 2.475GHz

Bandwidth: 500khz

RF Power: less than 20dBm

RF mode: AFHDS 2A

Modulationsart: GFSK

RX Sensibility: -105dBm

Receiver specification:

Channel: 6

Model type: fixed wing/helicopter/glider

RF receiver sensitivity: -105dBm

Modulation: GFSK

System type: AFHDS2A/AFHDS

Channel resolution: 1024 steps

Bind port: yes

Power port: yes( VCC)

Power: 4V -6.5V DC

Weight: 6.4g

Antenna lenght: 26mm

Size: 40.4 x 21.1 x 7.35 mm

Certificate: CE ,FCC

Merkmale:

Works in the frequency range of 2.405 to 2.475GHz.This band has been divided into 142 independent channels,each radio system uses 16 different channels and 160 different types of hopping algorithm.Silm design on transmitter for easy handling!

This radio system uses a high gain and high quality multi directional antenna,it covers the whole frequency band. Associated with a high sensitivity receiver,this radio system guarantees a jamming free long range radio transmission

Each transmitter has a unique ID,when binding with a receiver,the receiver saves that unique ID and can accepts only data from the unique transmitter.this avoids picking another transmitter signal and dramatically increase interference immunity and safety.

This radio system uses low power electronic components and sensitive receiver chip.The RF modulation uses intermittent signal thus reducing even more power consumption.

AFHDS2A system has the automatic identification function,which can switch automatically current mode between single-way communication mode and two-way communication mode according to the customer needs.

AFHDS2A has built-in multiple channel coding and error-correction,which improve the stability of the communication,reduce the error ratio and extend the reliable transmission distance.

Mode 1 is Right Hand Throttle, mode 2 is Left Hand Throttle

100% brand new

2212 920KV Brusheless Motor

– Type : 22 x 12mm

– KV: 920rpm/V

– Voltage: DC 7-12V

– Weight: 53g

30A simonk esc :

100% brand new

30A SimonK firmware Brushless ESC.

Soldered with 3pcs 3.5mm gold female plug, very convenient to connect motor.

ESC Specs:

Cont. current: 30A

Max. current: 35A

Input Voltage: 2-3S lipo / 4-12 cell Ni-MH/Ni-Cd

BEC: 5V 2A (Linear mode)

Size: 55x26x8mm (length 145mm including power cable)

Weight: ~24g

APM V2.8.0 with compass description:

- Diese Version eliminiert die 1.0mm 6P SM06B GPS-Schnittstelle der alten Version V2.52 und ersetzt sie durch eine DF13-4P I2C externe Kompass-Schnittstelle.
- Setzen Sie DF13-5P GPS-Schnittstelle mit externen Kompass-Schnittstelle, bequem für den Anschluss von GPS und externen Kompass.
- V2.52 I2C-Schnittstelle wird zur multifunktionalen MUX-Schnittstelle
- Modifizierte Version hinzugefügt Isolationswiderstand, wenn die OSD-Schnittstelle mit Telemetrie verwendet wird, ist die Schnittstellen effektiv vermieden
- V2.52 Version 3,5V Stromversorgung nimmt IPS79133, 6V Spannung, Ausgangsstrom 100mA, müssen Strom für sechs IC, etwas unzureichend Stromversorgung Fähigkeit, leicht zu verbrannt werden dwon liefern. Die neue Version nimmt US LP2985-3.3, 16V Spannungsfestigkeit, zuverlässiger, redcucing die Möglichkeit von Bad Gyro Gesundheit
APM V2.8.0 Flugsteuerung
- Nadel: gerade
- Stromversorgung: LP2985-3.3
- Maximale Spannung: 16V
- Einen 47uF Tantal-Kondensator hinzufügen
- Anschluss: MUX (UART0, UART2, mnnI2 und OSD sind optional, OSD ist der voreingestellte Ausgang)
Springerkappe wählen:
- Eingebauter Kompass: Stecken Sie die Jumper-Kappe auf die MAG-Stiftleiste.
- Externer Kompass: Ziehen Sie die Jumperkappe von der MAG-Stiftleiste ab.

7M GPS High Precision Built in Compass

With compass,and shell,especially for APM APM2.6 2.8

7M GPS Module for MWC/APM

These are Pre-configured, Flashed with the correct settings, and tested. To make them Plug and Play. This is NOT normally done in any other store!

Super Bright LED

BlackPlane with Standard Mk style mounting holes 45mm X 45mm

Blox Neo 6M Chipset

38400 bps (Default) Changed to 115200bps !

Output GGA, GSA and RMC frames

1Hz (Default) Changed to 5Hz!

Permanent Configuration Retention

Cable included

+ Moved LED to the Top
+ Bigger battery
+ compass on board
+ 6 pin connector for EZ connect to MEGA BLACK
+ 4 pin connector for onlyGPS use
+ 4 pin connecton for compass only use
+ GPS “PCB HOOD” for More EMI/RFI Shielding

can use both 4 pin at once

The GPS unit is per-configured for multiwii !! Unlike other shops send it out default settings, and yet you figure it out.

pre tested = PLUG AND PLUG for MWC 2.1!

MultiWii GPS assited Position Hold and RTH functions

7M GPS Module with on-board compass HMC5883 (compass) (mag)

Beschreibung:

– Main chip:U6M
– C/A code,1.023MHz
– Receiver Frequency:L1 [1575.42MHz]
– Locate performance
– 2D :3m(Average)
– 2D:2m(average),with WAAS
– drifting<0.02m/s
– accuracy:1us
– coordinate system:WGS-84
– max attitude height:18000
– Max speed:515m/s
– accerlaration:<4g

Spezifikation:

– tracking sensitivity:-161dBm
– Capture sensitivity:-148dBm
– cold start time:38s average
– Warm start time:35s average
– hot start time:1s average
– Capture time:0.1s Average
– Temperature:40to +80
– wide power supply voltage:+3.5V~+5.5V

– Module V2.0

Power Module w/ UBEC and XT60 connectors for APM APM2.6 / APM 2.8 Controller

The APM Power Module is a simple way of providing your APM 2.8 with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 6S LiPo battery. The Power Module comes completely assembled with Deans connectors, and wrapped in shrink tubing for protection.

Note: The Power Module is only designed to power APM, a RC receiver and APM accessories (GPS, 3DR radio). It isnotdesigned to power servos. Use your aircraft’s own ESC/BEC for that.

Spezifikationen:

Max input voltage: Support 6S battery

Max current sensing: 90A

Voltage and current measurement configured for 5V ADC

Switching regulator outputs 5.3V and 3A max

6-pos DF13 cable plugs directly to APM 2.5’s ‘PM’ connector