Walksnail Avatar HD Kit V2 (Dual Antennas Version)
الميزات
- Dual antennas
- Compatible 4K
- توافق 1080P 120fps 120fps
- زمن استجابة منخفض يبلغ 22 مللي ثانية
- وضع النطاق
- 4KM range
- تصميم خفيف الوزن
- FOV160°
- Built-in 32G storage,
- Support Gyroflow
- 6 فولت-25.2 فولت
- The only native 4:3 high-definition sensor in the FPV industry
Bullet Points for Walksnail Avatar HD Kit V2 (Dual Antennas)
- The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with low latency.
- Camera V2 with 2K pixels, 4:3 native sensor for better image quality and native 4:3 mode image ratio allows you to capture more of the surrounding scenery while flying the drone, resulting in more comprehensive and visually appealing images.Meanwhile, it’s better fit for regular FPV race as well.
- The camera ( 32G VTX KIT) supports Gyroflow, take you a smooth and stable video quality.
- The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.
- تم تحديث تصميم لوحة ثنائي الفينيل متعدد الكلور والهيكل، وتحسين جودة VTX، وأكثر متانة.
- تحسين مكان تركيب الهوائي، وذلك لحماية VTX بشكل أفضل.
- تم تغيير موضع زر ربط التردد لجعل عملية ربط التردد أكثر ملاءمة.
- تتم إضافة وسادة احتياطية لتوفير وضعين لتوصيل الطاقة.
- New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability . Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.
- The Avatar VTX comes with 32g built-in storage it can record 1080p or 720p HD flight videos without interference. 32G built-in storage, recording video time increased by 4 times.
- Supports both high frame rate and standard frame rate, it has an average latency of 22ms with the high frame rate.
- Designed to carry dual antennas to achieve more stable and powerful signals. The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable.
When using a 6S (six-series) battery, please ensure that you add a capacitor to the power input terminal to prevent any potential issues.
| المواصفات | |
| كاميرا | |
| الطراز | Avatar V2 camera |
| مستشعر الصور | 1/3.2-Inch 4Mp 4:3sensor |
| القرار | 1080P/60fps; 720P/100fps; 720P/60fps;1080P/120fps compatibility; 1080P/100fps compatibility; |
| Ratio | 4:3 native /16:9 |
| العدسة | 2.1mm |
| FOV | 160° |
| Aperture | F2.0 |
| Shutter | Rolling shutter |
| Min.Illumination | 0.001Lux |
| الوزن | 7.2g |
| الأبعاد | 19*19*22mm |
| Coaxial Cable | 140mm |
| Gyroflow | Only 32G VTX Supported |
| VTX | |
| الطراز | Avatar V2 module(Dual Antenna) |
| Communication Frequency | 5.725-5.850GHz |
| طاقة جهاز الإرسال (EIRP) | FCC:<30dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm |
| 1/O Interface | JST1.0*4(Power in)JST0.8*6(USB) |
| Mounting Holes | 25.5*25.5mm; 20*20mm |
| الأبعاد | 33.5*33.5*10.5mm |
| Storage | 32G |
| Recording | 1080p/720p |
| الوزن | 15.4g |
| درجة حرارة التشغيل | -20-40℃ |
| القنوات | 8 |
| Wide Power Input | 6 فولت-25.2 فولت |
| Supported FC System | Betaflight; Inav; Fettec; ArduPilot; Kiss |
| OSD | Canvas mode |
| Latency | Average delay 22ms |
| الهوائي | 2(IPEX) |
| Avatar V2 antenna | |
| Polarization | LHCP |
| Bandwidth | 5600MHz-6000MHz |
| Gain | 1.9dBi |
| VSWR | ≤1.5 |
| Input Impedance | 50Ω |
| Interface | IPEX-1 |
| الحجم | R15 X 45mm （without cable） |
| الوزن | 2g |
| قائمة التعبئة | |
| USB transfer extension cable | X1 |
| 4 Pin silicone cable | X1 |
| M2*4mm screws | X8 |
| M2*5mm screws | X4 |
| M2*6mm screws | X4 |
| M2*14mm screws | X4 |
| M2*5*0.5mm gasket | X4 |
Arabic 
English 
Russian 
German 