SpeedyBee Flex25 SPECIFICATIONS
دقة التقاط الفيديو: أخرى
حالة التجمع: جاهز تقريباً
المسافة عن بُعد: as show
جهاز التحكم عن بُعد: لا يوجد
يوصى بالعمر: 12+y
مصدر الطاقة: كهربائي
تتضمن العبوة: الصندوق الأصلي
الأصل: البر الرئيسي للصين
المحرك: محرك بدون فرشاة
رقم الموديل: SpeedyBee Flex25 HD
المادة: ألياف الكربون
استخدام داخلي/خارجي: داخلي-خارجي
الميزات: إمكانية FPV
وضع وحدة التحكم: الوضع 1، الوضع 2
بطارية وحدة التحكم: لا يوجد
قنوات التحكم: 8 قنوات
نوع حامل الكاميرا: حامل الكاميرا الثابت
التصوير الجوي: نعم
SpeedyBee Flex25 HD 78mm F7 35A AIO 4S 2.5 Inch CineWhoop RC FPV Racing Drone BNF with Runcam Falcon 120fps Digital Camera Toys
المواصفات:
Brand: SpeedyBee
Model: Flex25 (HD)
Item Name: 78mm Wheelbase F7 4S 2.5 Inch FPV Racing Drone
Wheelbase: 78mm
Dimension: 136x136x35mm ( LxWxH)
Weight: 155g ( without Battery)
| SpeedyBee F745 35A AIO | Gyro: MPU6000 OSD: AT7456E Support 3-6S Lipo Mounting Hole: 25.5×25.5mm Con. Current: 35A Firmware: BLHeli_S FC: Wireless firmware flashing + full Betaflight configuration ESC: Wireless firmware flashing + full BLHeli_S configuration Change motor directions wirelessly 4 UARTS + Barometer + I2C pads + 8MB Blackbox flash |
| SpeedyBee 1404 4500KV Motor | KV: 4500KV Mounting Hole: M2x9 , M2x5 |
| Gemfan D63-3 2.5 Inch Propeller | Diameter: 63mm Pitch: 3 in Inner shaft diameter: 1.5mm Hub Thickness: 4.9 mm Weight: 1.36g each |
| VTX Antenna | Model: Speedy Bee 5.8 GHz Antenna V2 Frequency range: 5.5-6.0 GHz Gain: 2.8dBi Polarization: RHCP |
| Digital VTX & Camera Kit | VTX Model: RUNCAM LINK Frequency: 5.725-5.850 GHz Power: 7.4-26.4 V ( 4-9W) Dimensions: 29×29×13 mm Camera Model: RunCam Falcon Nano Image Sensor: 1/3.2 Resolution: 1920*1080@120fps Lens: OV D:150° H:118° V:87° Dimensions: L16xW14xH17mm |
Recommend Battery( NOT Included) | Recommend 4S 450-850mAh LiPo Flight Time: around 5mins (Test with 4S 850mAh Lipo ,total flight time depends on flying style / throttle position.) |
تتضمن العبوة:
1x SpeedyBee Flex25 HD FPV Drone
1x Extra Gemfan D63-3 Propeller Set ( 2L+2R)
1x set of connection cables
1x set of Screws and Nuts
Introducing the SpeedyBee Flex25, the world’s smallest 2.5-inch CineWhoop drone, featuring a 28% smaller wheelbase compared to other 2.5-inch cinewhoops. This innovative drone comes equipped with a 120fps RunCam Link Falcon Nano Kit digital FPV system, built-in F745 35A Bluetooth and WiFi AIO module for seamless connectivity. Additionally, it boasts the world’s first plug-and-play compatibility with GoPro/Insta360 Go cameras and RunCam Thumb cameras, all within a tough and rugged unibody design.
The Cinewhoop’s wheelbase is inherently limited by its prop size. To mitigate this constraint, we’ve strategically placed the motors at different levels to significantly reduce the overall length. With a wheelbase of just 78mm, you can easily accommodate lightweight action cameras.
Purchase this quadcopter with the advanced RunCam Link Falcon Nano kit digital FPV system, which allows for wireless control of brightness, saturation, and other settings on your DJI FPV goggles at any time.
The SpeedyBee Flex25 is powered by an F745 35A All-In-One (AIO) wireless flight controller, which features a high-end STM32F745 microcontroller unit (MCU) and a powerful 35-amp Bluejay electronic speed controller (ESC).
The AUX 4 port is designed for controlling and monitoring your connected action camera, allowing you to start recording remotely via the provided cable and your transmitter.
The Unibody Protective Duct, crafted from durable car bumper material, provides comprehensive impact protection for your quadcopter. Reinforced with M2.5 hex standoffs and screws, this design ensures that your 2.5-inch CineWhoop is one of the toughest in your fleet.
Upon powering on your SpeedyBee drone for the first time, please follow the in-app instructions within the SpeedyBee app. Complete the setup process and initiate the sending function once you have finished.
Connect the drone to your computer via the USB port and use the Betaflight/BLHeli-S Configurator software to configure settings. Additionally, ensure you power the quad with a suitable battery before taking flight, as the AIO flight controller will not function without power.
The 6-pin connector on the quadcopter’s end has the following pin definitions: Pin 1-3 are E2, Pin 4 is 8%, Pin 5 is BAT, Pin 6 is SV, and Pin 7 is GND. Additionally, there are two power cables: one 6-pin, 30mm cable for HD cameras and another 6-pin, 60mm cable for RunCam thumb control. A third cable is dedicated to the Naked GoPro 8/7 AUX 4 pin, which sets the start-up mode.
Arabic 
English 
Russian 
German 