RTF 3 Axis 3Axis Brushless Gimbal SPECIFICATIONS

Name: RTF 3 Axis 3Axis Brushless Gimbal - / 2204 2208 140kv Motor / Storm32 Controlller for Gopro 3 4 Runcam3 Walkera X350 Xiaomi SJ4000 - Drone
Availability: InStock

لـ: Gopro3 4 Gopro Hero 5 6 Gopro session SJ4000 RC drones

الاستخدام: المركبات وألعاب التحكم عن بعد

ترقية قطع الغيار/الإكسسوارات: الإطار

مستلزمات الأدوات: مطحون

المعايير الفنية: القيمة 3

الأجهزة الطرفية/الأجهزة الطرفية للتحكم عن بُعد: وحدة التحكم عن بُعد

العمر الموصى به: 12+y,14+y

قطع غيار السيارات والمركبات: Radio Systems

المنشأ: البر الرئيسي للصين

رقم الموديل: OEM

المواد: معدن

سمات الدفع الرباعي: Slot

لنوع المركبة: الطائرات

اسم العلامة التجارية: Readytosky

readytosky is a professional FPV RC Module accessories company . if you want to know more about trade for wholesale and bulk purchase, please contact us freely .

RTF CNC FPV 3 Axis Brushless Gimbal W/ 2204 2805 Motor & Storm32 Controlller for DJI Phantom Walkera X350 Gopro 3 4 SJ4000 Xiaomixiaoyi

الوصف:

Brushless gimbal

الميزات:

Color: black / silver

Axis: 3 axis gyro

Flight controller: Storm32

Motor : 2 pcs 2204 260kv & 1 pc 2805 140kv

Battery plug: JST

Weight: about 177.5±2 g

Compatible camera: Gopro 4,3,2 ; SJ4000 , Xiaomi xiaoyi camera( not included)

compatiable frame : DJI Phantom 1 2 / Walkera X350

Strom32 Gimbal Controller

الميزات:

board color: blue

motor drivers in DFN packages: yes

on-board MPU: yes

on-board bluetooth module: no

I2C plug type: picoblade (1.25mm JST)

I2C#2 plug type: picoblade (1.25mm JST)

pin headers: no

Included accessories:

MPU module

cable with connectors for MPU module

Points to note:

Firmware : 051

The pins on connector I2C#2 are reversed as with respect to connector I2C

ALL boards HAVE the diode required for running a bluetooth module!!!

المواصفات

supply voltage:3S battery

motor current: max. 1.5 A per motor

Comment: This is not yet fully exploited, motors with resistances of 12 Ohm , motors with 10 Ohm may be handled with care (see here andhere).

board dimensions: 50 mm x 50 mm, 45 mm bolt to bolt, holes Ø3 mm

Warm notice:

1. Recommended power supply is 12V(3s battery);

2, Camera must be fixed in the head (without any loosening);

3. Adjust the Gopro camera to the left or right,so that the camera is at Horizontal level;

4. Before camera fixed in the gimbal , please do not push ” on ” button to have power.

5,The gimbal camera must be use belt tight, otherwise it will have problems. And if you do this many times, it will cause damage to the flight controller.

– 1 x Aluminum gimbal installed 3 motors(assembled)

– 1 x Gimbal controller

– 1 x Sensor

– 3 x servo wire(10cm)

– Wiring

( camera not included)