RadioLink R8FG SPECIFICATIONS

الاستخدام: المركبات وألعاب التحكم عن بعد

الأجهزة الطرفية/الأجهزة الطرفية للتحكم عن بُعد: أجهزة الاستقبال

العمر الموصى به: 12 + ص، 14 + ص

قطع غيار السيارات والمركبات: أجهزة الاستقبال

الكمية: 1 قطعة

المنشأ: البر الرئيسي للصين

رقم الموديل: R8FG

المواد: بلاستيك

لنوع المركبة: السيارات

اسم العلامة التجارية: RadioLink

Compatible transmitters RadioLink R8FG 2.4G 8-channel receiver . with integrated gyro for professional car drifting and high voltage servo supported .

When you purchase a new R8FG, it requires binding to work with your transmitter. On the side of the receiver, you’ll find a black button labeled ‘ID SET’. To initiate the binding process, press and hold this button for more than one second, then release. The LED light will begin flashing rapidly, indicating that the binding process is in progress.

R8FG has a built-in gyroscope, which can output not only PWM signals but also PPM and SBUS signals . there are four working modes including ordinary PWM mode, SBUS mode, and Gyro SBUSmode . port is only for 2S-8S battery voltage telemetry: port cannot be used to power the receiver.

Press the bind button three times in quick succession (within two seconds) to turn the gyroscope on or off. Channels 1-6 transmit PWM signals, while channels 7 and 8 transmit PPM and SBUS signals, respectively.

RadioLink R8FG V2.0: A high-performance receiver featuring BluePurple-S BUS, PPM, and PWM technologies, measuring 35mm x 24mm x 13.5mm (1.38

To ensure optimal performance, it is recommended to keep antennas as straight as possible to maintain an effective control range. Additionally, users should be aware that larger models may contain metal components that can interfere with signal transmission. To prevent vibration-induced issues, consider using foam material during installation to absorb any shocks or impacts.

RBFG’s PCB board and pins have the same waterproof treatment as the mobile phone . the waterproof grade is IPX4: The IPxx standard recommended by the IEC .