HappyModel Crux3 SPECIFICATIONS
الاستخدام: المركبات وألعاب التحكم عن بعد
ترقية قطع الغيار/الإكسسوارات: أخرى
مستلزمات الأدوات: أخرى
الأجهزة الطرفية/الأجهزة الطرفية للتحكم عن بُعد: وحدة التحكم عن بُعد
العمر الموصى به: 12+y
قطع غيار السيارات والمركبات: أجهزة الاستقبال
المنشأ: البر الرئيسي للصين
رقم الموديل: Crux3 1S ELRS
المواد: المواد المركبة
سمات الدفع الرباعي: أخرى
لنوع المركبة: طائرات الهليكوبتر
اسم العلامة التجارية: happymodel

Flight test video
الميزات:
40gram 1s brushless Toothpick drone
AIO Flight controller with ELRS Receiver and 5.8G VTX
CADDX ANT Camera
New 1202.5 KV11500 brushless motor
Recommend to use 1s 450mah/650mah/660mah/720mah battery
Compatible with CaddxFPV Peanut and Insta360 GO2
Carrying Caddxfpv peanut Got 4.5 minutes flying time with 1s 650mah battery
المواصفات:
اسم العلامة التجارية: هابي مودل
Item Name: Crux3 1S ELRS
Wheelbase: 115mm
Size: 97mmx97mmx35mm (without propellers)
Weight: 40g(without battery)
تتضمن العبوة:
Item Name | Qty |
Crux3 Frame and canopy | 1 |
ELRS F4 2G4 flight controller built-in SPI ExpressLRS 2.4G receiver | 1 |
Happymodel EX1202.5 KV11500 brushless motor | 4 |
Gemfan 75mm bi-blade Propellers(4cw+4ccw) | 1 |
Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera | 1 |
5.8G 25mw~200mw 40ch vtx (Flight controller built-in) | 1 |
Screw Driver | 1 |
Propeller disassemble tool | 1 |
3D Printed canopy for Insta360 GO2 and CaddxFPV Peanut |
|
Happymodel Handbag | 1 |
المحرك | Mode: EX1202.5 KV11500 |
المراوح | Gemfan 75mm Center Thickness:5mm Prop Diameter:75mm Center Hole diameter:1.5mm Pitch:0.9in |
Flight controller | MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Built-in 5V 1A BECFlight controller firmware target: CRAZYBEEF4SX1280 |
Onboard 4in1 ESC | MCU upgraded to EFM8BB21 Current: 5A continuous peak 6A (3 seconds) |
Onboard SPI ExpressLRS 2.4GHz Receiver | Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz Antenna : SMD antenna Receiver protocol to flight controller: CRSF Could bind with All ExpressLRS 2.4GHz TX module , ExpressLRS firmware need 1.0.0 or latest |
Onboard 5.8g VTX | Output power: 25mw~200mw switchable Smartaudio ready |
Caddx ANT 1200tvl camera | مستشعر الصور مستشعر CMOS مقاس 1/3 بوصة الدقة الأفقية: 1200 تي في إل TV System: NTSC or PAL الصورة: 16:9 أو 4:3 التزامن: داخلي مصراع إلكتروني: بال بال: 1/50 ~ 100,000؛ NTSC: 1/60 ~ 100,000 S/N Ratio : >52dB (AGC OFF) إخراج الفيديو: CVBS العدسة: 1.8 مم Min. Illumination: [email protected] التحكم في الكسب التلقائي: نعم BLC: نعم WDR: WDR العالمية DNR: 3D DNR Dimensions: 14*14mm(with bracket to 19*19mm) مدخل طاقة واسع: تيار مستمر 3.7-18 فولت درجة حرارة العمل: -20 درجة مئوية ~ +60 درجة مئوية Weight: 2g (N.W.)
|








عملية التسوق تصفح إضافة إلى عربة التسوق ادفع مع البضائع الضمان تأكيد وإعطاء تأكيد وإعطاء التوقيع على الإرسال لنا يبدأ الطرد

If you’re unable to checkout immediately after the auction closes, please wait for a few minutes and try again. In the unlikely event that there’s an unexpected issue (for example, if your order cannot be shipped within 48 hours), we will reach out to you as soon as possible.

Our Service: We Guarantee On-Time Delivery. If your product isn’t received within the guaranteed delivery time, we offer a full refund. Additionally, our Return & Refund Policy provides extra protection for 15 days after order completion. Returns are accepted only for products in perfect condition. Guaranteed Quality: If you’re not satisfied with the quality of your product, you’ll receive a full refund. We stand by the quality of our products and want to ensure you’re completely satisfied.

We appreciate it when you’re satisfied with our product and service! Please take a moment to leave us positive feedback and a 5-star review. However, if you experience any issues or dissatisfaction with our service, please reach out to us before leaving feedback. We’ll work to resolve the issue immediately and ensure your satisfaction.













