Airdrop System for DJI Mavic 3/3 Classic/2/AIR 2/2S Drone Thrower Fishing Bait Wedding Ring Gift Deliver Life Rescue Kits

Note: This product is a quick release product. Use a photoresistor switch (no photosensitive cable). Before purchasing, please pay attention to the drone model to which the variant applies. If the purchase is wrong. Nothing to do with the seller.

الميزة:

1. Suitable for Mavic 3 drone,
2. It can be delivered remotely for advertising, throwing bait, throwing gifts, delivering meals, delivering wedding rings, etc,
3. USB charging, quick release, one-key remote control,
4. Lightweight and safe, it will neither increase the burden of the drone nor damage the drone, and is easy to install and disassemble,
5. The height of the front landing gear is increased by 3.7cm, and the height of the rear landing gear is increased by 3cm, which can effectively prevent ground debris from contaminating the body or damaging the gimbal and body during take-off and landing.

Note: The “red light is always on” during charging, the “green light is always on” when fully charged, the parabola will flash a few red lights when it is opened for normal use, and then the “red light is always on”;

الوصف:
الخامة: ABS,
Applicable models: for Mavic 3/3 Classic
Color: Dark grey,
Net weight: 79.2g
Product size: 9.7*8.5*5.3cm

المواصفات
الحد الأقصى لوزن الحمولة القصوى: 500 جم,
سعة البطارية المدمجة 150 مللي أمبير/ساعة,
واجهة الشحن: مايكرو-يو إس بي,
مدة الشحن: 90 دقيقة,
اشحن مرة واحدة لفتح حوالي 300 مرة,

قائمة التعبئة:
1 pcs payload release kits
1 set Landing gear
1 pcs USB charging cable
1 hanging wire hook .

ملاحظة:
1.Does not include the Drones,
2-الانتقال: 1 سم = 10 مم = 0.39 بوصة,
3- يُرجى السماح بخطأ 1-3 مم بسبب القياس اليدوي. 3- يُرجى التأكد من عدم ممانعتك قبل الطلب,
4- نظرًا للاختلاف بين الشاشات المختلفة، قد لا تعكس الصورة اللون الفعلي للمنتج، يُرجى التأكد من عدم ممانعتك قبل الطلب، شكرًا لك!
5. تأكد من أن لديك طاقة كافية قبل الاستخدام.

for DJI Mavic 2 Pro/Zoom Feature:

1. مناسبة للطائرات بدون طيار Mavic 2 Pro/Zoom;
2. يمكن توصيلها عن بُعد، واستخدامها للإعلانات، والطعم، والهدايا، وتوصيل الوجبات، وخواتم الزفاف، وما إلى ذلك;
3. شحن USB، تحرير سريع، جهاز تحكم عن بُعد بمفتاح واحد;
4. تم تثبيت ترس الهبوط في الجزء السفلي، مما يمكن أن يرفع الطائرة بدون طيار بفعالية بمقدار 3.2 سم، مما يمكن أن يمنع أشتات الطائرة في الجزء السفلي من الطائرة من تلويث جسم الطائرة أو إتلاف جهاز التحكم أثناء الإقلاع والهبوط;
5. خفيفة الوزن وآمنة، لا تؤثر على تحليق الطائرة بدون طيار، وسهلة التركيب والتفكيك.

الوصف:
الخامة: ABS,
الموديلات القابلة للتطبيق: لـ Mavic 2 Pro & Zoom,
اللون:رمادي,
الوزن الصافي: 70 جم,
حجم المنتج: 10.2 * 8.5 * 6.6 سم

قائمة التعبئة:
1قطعة 1 قطعة أيردروبر
1مجموعة معدات الهبوط 1مجموعة معدات الهبوط
1قطعة واحدة كابل شحن الطائر الطائر
1 قطعة حلقة من الفولاذ

ملاحظة:
1- لا يشمل الطائرة بدون طيار,
2-الانتقال: 1 سم = 10 مم = 0.39 بوصة,
3- يُرجى السماح بخطأ 1-3 مم بسبب القياس اليدوي. 3- يُرجى التأكد من عدم ممانعتك قبل الطلب,
4- نظرًا للاختلاف بين الشاشات المختلفة، قد لا تعكس الصورة اللون الفعلي للمنتج، يُرجى التأكد من عدم ممانعتك قبل الطلب، شكرًا لك!

Applicable to DJI Mavic 3, Mavic 3 Classic, Mavic 2, and Mavic Air 2/Air 2S drones, this Airdrop System enables remote delivery of gifts, including bait for fishing, wedding rings, and other small items.

This lightweight Airdrop System weighs approximately 70 grams, making it safe and convenient to use. Designed to seamlessly integrate with your DJI Mavic drone’s fuselage, it enables you to deliver small gifts, such as tokens or mementos, through aerial means.

Enjoy a seamless installation experience with this non-invasive Airdrop System. Once installed, it won’t obstruct the functionality of your DJI Mavic drone’s visual positioning sensor or infrared sensor, ensuring uninterrupted use.

The Airdrop System’s improved landing capabilities increase the effective landing distance by 32mm, allowing for safe and stable touchdowns even on uneven terrain. This design feature ensures the integrity of your DJI Mavic drone’s fuselage remains protected during takeoff and landing operations.

The Airdrop System features a unique landing gear design, where the front landing gear has no directional markings, while the rear landing gear is clearly labeled as ‘L’ or ‘R’. This allows for easy installation and secure fastening of the back landing gear, which can be opened and closed as needed.

Key Specifications for DJI Mavic 2 Pro/Zoom: Maximum Load Capacity: approximately 500g, Remote Control Distance: signal distance not specified, Packing List: includes SYSTEM REMOTE Antenna (compatible with ICtt4), does not include weights or throttle.

الميزة:

1. Suitable for AIR 2S/AIR 2 drones,
2. It can be delivered remotely for advertising, throwing bait, throwing gifts, delivering meals, delivering wedding rings, etc,
3. Lightweight and safe, it will neither increase the burden of the drone nor damage the drone, and is easy to install and disassemble,
4. Install the landing gear at the bottom without affecting the propeller and sensor,
5. The height of the front landing gear is increased by 31mm, and the height of the rear landing gear is increased by 28mm, which can prevent the ground debris from contaminating the fuselage or damaging the gimbal when taking off and landing the aircraft, and it can still take off and land on uneven ground.

الوصف:
الخامة: ABS,
Applicable models: for AIR 2S,AIR 2,
اللون:رمادي,
Net weight: 62.9g
Package weight: 125g
Product size: 9.2*8*2.8cm (thrower), 6.1*2.1*1.2cm (rear landing gear), 5*1.7*1.5cm (front landing gear)
Package size: 12*10*7cm

المواصفات
Maximum load: 500 grams
Built-in battery capacity: 150mAh
Standby time: about 12 hours
Can be turned on with one charge: about 200 times
Self-charging time: 1 hour

قائمة التعبئة:
1 قطعة قاذف 1 قطعة
1مجموعة معدات الهبوط 1مجموعة معدات الهبوط
1pcs Ring
1pcs Foot pad
1خطاف سلك معلق 1

ملاحظة:
1. Does not include the Drone,
2. Before use, please fully charge it,
3. Please do not hang or throw objects that are too large or heavy, so as not to cause the instability of the drone and affect the flight safety of the drone,
4. Please check the working status of the drone and the dropper before throwing. Please use the dropper in a safe, open, and interference-free place, do not throw objects over crowds, cars, buildings, etc. to avoid personal injury and property,
5.Transition: 1cm=10mm=0.39inch,
6.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
7.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!

The Airdrop System for DJI Mavic 3/3 Classic, Mavic 2/AIR 2/2S drones enables remote delivery capabilities, perfect for various applications such as advertising, fishing bait tossing, gift giving, meal delivery, and even wedding ring presentation.

The Airdrop System Thrower measures approximately 6.1 x 2.1 x 1.2 cm in size (excluding rear landing gear), and its compact design weighs only about 125g, making it perfect for use with DJI Mavic Air 2/2S drones.

The Airdrop System is specifically designed for use with DJI Mavic Air 2S drones. It features a quick-release mechanism and can be controlled via the drone’s remote with just one button, providing effortless operation.

The Airdrop System for DJI Mavic Air 2S drones is designed to be lightweight, safe, and stable, allowing for remote delivery capabilities ideal for various applications such as advertising, fishing bait throwing, and delivering wedding rings.

unobstructed Installing a thrower will not block the drone visual positioning sensor .

The Airdrop System features a buckle switch indicator, charging port with charging indicator, and swing arm. Key specifications include:
• Maximum load capacity: 500g
• Built-in battery capacity: 1500mAh
• Standby time: approximately 12 hours
• Self-charging time: hours
• One charge can open the thrower about 200 times

The Airdrop System features raised landing gear, which increases the front landing gear height by 31mm and rear landing gear height by 28mm. This design upgrade helps prevent debris from contaminating the fuselage while still allowing for takeoff and landing on uneven ground.

The Airdrop System’s landing gear design allows for easy disassembly and reassembly. Simply snap the thrower into place and secure it with the top buckle, which completes the installation process at the drone’s bottom centerline.

To use the Airdrop System with your DJI Mavic drone, open the DJI Fly app and navigate to the remote control settings menu. From there, toggle off the Safety Auxiliary LED and click the settings button in the top-right corner to complete the setup.